SKM 100 G2 / SKM 300 G2 / SKM 500 G2 radiomicrophones
Muting the radiomicrophone
The radiomicrophone has a MUTE switch that noiselessly mutes the audio signal without switching the radiomicrophone off.
Turn the protective cap | at the bottom of the radiomicrophone |
so that the MUTE switch | becomes accessible. |
Set the MUTE switch to the position ’MUTE’. The “MUTE” display appears on the radiomicrophone’s display panel.
Set the MUTE switch back to the original position to retrans- mit the audio signal.
Operation and battery status indication
The red LED (LOW BAT/ON) provides information on the current operating state of the radiomicrophone:
Red LED lit up: The radiomicrophone is switched on and the capacity of the batteries/BA 2015 rechargeable battery is sufficient.
Red LED flashing:The batteries are/the BA 2015 rechargeable bat- tery is going flat (LOW BAT)!
Care and maintenance
Use a slightly damp cloth to clean the radiomicrophone from time to time.
Note:
Do not use any cleansing agents or solvents.
To clean the radiomicrophone’s sound inlet basket, proceed as fol- lows:
Unscrew the sound inlet basket (turn counterclockwise) and remove it.
Remove the foam insert.
Use a slightly damp cloth to clean the sound inlet basket from the inside and ouside.
Reinsert the foam insert.
Replace the sound inlet basket on the radiomicrophone and screw it tight.
31