Sennheiser LV307, LV308 manual Inserting and charging the accupack

Page 33

SK 100 G2 / SK 300 G2 / SK 500 G2 bodypack transmitters

Press the two unlocking buttons and open the battery com- partment cover .

Insert the two batteries as shown above. Please observe correct polarity when inserting the batteries.

Close the battery compartment. The battery compartment cover locks into place with an audible click.

Inserting and charging the accupack

The transmitter can also be powered via the rechargeable Sennhei- ser BA 2015 accupack. Insert the rechargeable battery into the bat- tery compartment as described above.

The transmitter has two charging contacts and a sensing contact on its short sides. The rechargeable battery can be recharged while remaining in the transmitter. Insert the transmitter into the L 2015 charger (see ”Charging the rechargeable battery BA 2015“ on page 27).

Note:

For rechargeable battery operation of the transmitter, only use the BA 2015 rechargeable battery in order to ensure optimum operational reliability. For charging the accupack, only use the L 2015 charger. Both the rechargeable battery and the charger are available as accessories.

The rechargeable battery is fitted with an integrated sensor which is – via a third contact – monitored by the electronics of the transmitter and the charger. The sensor is necessary for the following control purposes:

yThe taking into account of the different voltage characteristics of primary cells (batteries) and accupacks. The battery status indications on the displays, the transmission of transmitter battery status information to the rack-mount receivers and the switch-off thresholds at the end of the operating time are corrected correspondingly. Due to the missing sensor, individual rechargeable battery cells will not be identified as accupacks.

yThe monitoring of the rechargeable battery temperature during charging in the L 2015 charger.

33

Image 33

Contents Tourguide UHF Page Contents Thank you for choosing Sennheiser Important safety instructions Replacement parts Power sourceSafety check OverloadingDo not solder Safety instructions for Lithium-Ion rechargeable batteriesSystem components Tourguide UHF systemSpecial features EK 1038 receiverOperating controls Segments Capacity approx % Battery icon flashing LOW BAT Operation and battery status indicationRF signal indication IndicationsHow to properly use the battery pack or the batteries Inserting and changing the battery pack/batteriesConnecting the headphones Preparing for useSwitching the receiver on/off Using the receiverAdjusting the volume Switching the channelMenu is given within the chapter The setup menu Configure the receiverOperating menu of the receiver Attaching the receiver to clothingFunction of the buttons in the setup menu Starting the setup menuGetting into the setting mode of a menu Getting into the operating menu of the setup menuSelecting a menu Software stored on a chip in the deviceStoring a setting Adjusting a settingCanceling the entry Exiting the setup menuLOC. OFF LOC. on Setup menu of the receiverActivating/deactivating the lock mode Adjustment tips for the setup menuLocking channels for the user Changing the receiving frequencies of the channelsReleasing locked channels Adjusting the squelch thresholdLimiting the volume at the headphone output Displaying the revision of the firmwareCopy function Slave Quick charger LED indications Switching the charger on or off Setting up the chargerCascading several chargers Do not place the receiver on delicate surfacesCare and maintenance Using the chargerCharging the rechargeable battery BA Compartments As shown Red LEDSK 100 G2 / SK 300 G2 / SK 500 G2 Channel bank systemQuick charger Delivery includes SKM 100 G2 / SKM 300 G2 / SKM 500 G2 radiomicrophonesChanging the microphone module Inserting and changing the batterySwitching the radiomicrophone on/off Using the radiomicrophoneMuting the radiomicrophone SK 100 G2 / SK 300 G2 / SK 500 G2 bodypack transmitters Inserting and charging the accupack Attaching the microphones Connecting the microphone/line cableUse the microphone clips Positioning the microphonesSwitching the transmitter on/off Using the bodypack transmitterMuting the transmitter Play appears on the display panelMicrophone input, XLR-3 socket Button UP Unbalanced SKP 100 G2 / SKP 500 G2 plug-on transmittersPlugging the transmitter onto the microphone Betriebs- und Batterieanzeige Battery status indication LC display panel Evolution wireless transmitters GLC display panel Mute displayDisplay backlighting Pilot displayButtons Overview of menusWorking with the operating menu Getting into the operating menuExiting the operating menu Overview of the operating menu of the transmitters ExitDisply Switching between the channels in a channel bank Switching between channel banksAdjusting the sensitivity Selecting the frequencies to be stored in the channelSKP 500 G2 only Switching the phantom powering on/offLoading the factory-preset default settings Selecting the standard displayEntering a name Activating/deactivating the lock mode Activating/deactivating the pilot tone transmissionExiting the operating menu Error checklist TroubleshootingSet transmitter and receiver to Deactivate the muting functionFor the receiver EK Recommendations and tipsFor the radiomicrophones …for the bodypack transmittersHDX noise reduction Progress you can hearInherent Quick charger Accessories and spare partsSKP 100 G2 / SKP 500 G2 plug-on transmitter SK 100 G2 / SK 300 G2 / SK 500 G2 bodypack transmitterSpecifications EK 1038 receiver2015charger Deep discharge recovery charge Evolution wireless transmitters GAutomatic security switch-off after 6 h at the latest Plug-in mains unitsTune Chan Channel assignmentManufacturer declarations WarrantyStatements regarding FCC and industry Canada Weee DeclarationManufacturer declarations