Uniden EXI 7926 manual Step, Preparing the battery pack

Page 11

Step 3

Preparing the battery pack

Charge the battery pack for more than 12-15 hours before you start using your phone.

1 Press and slide the battery compart- ment cover toward the bottom of the unit.

2 Connect the battery pack connector. The plug will fit only one way. Then insert the battery pack into the battery compartment.

Black

Red	3 Securely close the battery compart-
	ment cover by sliding it up until it
	snaps into place.

4 Place the handset on the base unit with the keys and display facing upward.

When the handset has been properly placed on the charging terminals of the base unit, the "status" LED of the base unit lights and charging begins. Charge the battery for at least 12-15 hours.

You can place either side up for charg- ing the battery.

status LED

11

Image 11

Contents Page Introduction FeaturesLine2 Controls and functions39 40 41 42 43 Table of contents 11 to Read this firstStep Checking the package contents Choose the best location Setting up the base unitConnect the base unit Used only when second lineIf you arent sure of your dialing system Choose the dialing modeIf your dialing system is Set the switch to Preparing the battery pack Do not use any liquids or solvents Battery use time per chargeWhen the battery charge becomes low Cleaning the battery contactsSetting up Caller ID options To select Entering your area codeHandset On Base Handset Off Base Base Only Auto Talk off BasicsMaking and receiving calls Basic 2-line operationAnswering a call from the handset Answering a call from the baseOff-hook dialing Using the tone featureMaking a call from the base Making a call from the handsetBase Flash and Call WaitingLast number redial HandsetPlacing a call on hold Using the speakerphone mute featureSelecting a different channel Using the page featureAdjusting the volume controls Traveling out-of-rangeLine operation Line featuresBase ringer volume Base speaker volumeWay conferencing Conference Line 1 Line Paging from the handset to base Using your EXI 7926 intercomPaging from the base to handset Transferring calls Using the speakerphoneOn the handset Memory featuresStoring a phone number in memory On the base Editing a phone number in memory Press delete/flash to remove any unwanted From the handset Erasing a number from memoryFrom the base At the base Using memory dialingReviewing Caller ID name/numbers Caller ID featuresUsing Caller ID Screening your callsCalling a Caller ID name/number Select Location screen appears. Use Storing a Caller ID number in a memory locationDeleting a Caller ID message Deleting all Caller ID name/numbers Using Cidcw Caller ID with Call WaitingHeadset Jack Headset installationAdditional information Changing the digital security codeStandard wall plate mounting Mounting the base unit on a wallDirect wall plate mounting To attach the beltclip To remove the beltclip Installing the beltclipWhen very dirty MaintenanceBattery replacement and handling When slightly dirtySymptom Suggestion TroubleshootingHandset SpecificationsGeneral Base unitW, X, Y, Z Index