Uniden EXI 7926 manual Setting up the base unit, Choose the best location

Page 8

Step 2

Setting up the base unit

Do the following steps.

•Choose the best location

•Connect the base unit

•Choose the dialing mode

Choose the best location

Before choosing a location for your new phone, read the INSTALLATION CONSIDERA- TIONS included in the PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS brochure. Here are some important guidelines you should consider:

Avoid heat sources, such as radiators, air ducts, and sunlight

Avoid television sets and other electronic equipment

Avoid noise sources such as a window by a street with heavy traffic

Avoid microwave ovens

Avoid excessive moisture, extremely low temperatures, dust, mechanical vibration, or shock

Choose a central location

Avoid personal computers

Avoid other cordless telephones

•You should charge your handset for 12-15 hours before using the phone.

•The location should be close to both a phone jack and a continuous a power outlet which is not switchable.

•Keep the base and handset away from sources of electrical noise such as motors and fluorescent lighting.

•Be sure there is sufficient space to raise the base antenna fully vertical.

•The base can be placed on a desk, tabletop or mounted on a standard wall plate.

8

Image 8

Contents Page Features IntroductionControls and functions Line239 40 41 42 43 Table of contents Read this first 11 toChecking the package contents StepSetting up the base unit Choose the best locationUsed only when second line Connect the base unitIf you arent sure of your dialing system Choose the dialing modeIf your dialing system is Set the switch to Preparing the battery pack Battery use time per charge When the battery charge becomes lowCleaning the battery contacts Do not use any liquids or solventsSetting up Caller ID options Entering your area code To selectBasics Making and receiving callsBasic 2-line operation Handset On Base Handset Off Base Base Only Auto Talk offAnswering a call from the base Answering a call from the handsetUsing the tone feature Making a call from the baseMaking a call from the handset Off-hook dialingFlash and Call Waiting Last number redialHandset BaseUsing the speakerphone mute feature Placing a call on holdUsing the page feature Adjusting the volume controlsTraveling out-of-range Selecting a different channelLine features Base ringer volumeBase speaker volume Line operationWay conferencing Conference Line 1 Line Paging from the handset to base Using your EXI 7926 intercomPaging from the base to handset Using the speakerphone Transferring callsOn the handset Memory featuresStoring a phone number in memory On the base Editing a phone number in memory Press delete/flash to remove any unwanted Erasing a number from memory From the handsetFrom the base Using memory dialing At the baseCaller ID features Using Caller IDScreening your calls Reviewing Caller ID name/numbersCalling a Caller ID name/number Storing a Caller ID number in a memory location Select Location screen appears. UseDeleting a Caller ID message Using Cidcw Caller ID with Call Waiting Deleting all Caller ID name/numbersHeadset installation Additional informationChanging the digital security code Headset JackMounting the base unit on a wall Standard wall plate mountingDirect wall plate mounting Installing the beltclip To attach the beltclip To remove the beltclipMaintenance Battery replacement and handlingWhen slightly dirty When very dirtyTroubleshooting Symptom SuggestionSpecifications GeneralBase unit HandsetIndex W, X, Y, Z