Uniden EXI 7926 manual Direct wall plate mounting

Page 40

Additional information

Handset retainer	8 On the base unit, pull the handset
	retainer out of the slot. Rotate it clock-
	wise 180 degrees.

9 Flip the retainer from front to back. Slide it back into the slot so that the lip of the retainer is up and the oval is down. The retainer holds the handset in place.

Direct wall plate mounting

If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:

•Avoid electrical cables, pipes, or other items behind the mounting location, that could cause a hazard when inserting screws into the wall.

•Try to mount your phone within 10 - 15 feet of a working phone jack to avoid excessive cord lengths.

•Make sure the wall material is capable of supporting the weight of the base and handset.

TOP

3/16 in.

3-15/16 in.

1 Insert two mounting screws into the wall, (with their appropriate anchoring device), 3-15/16 inches apart. Allow about 3/16 of an inch between the wall and screwheads for mounting the phone.

2 Refer to steps 1 through 9 on page 39 to mount the telephone.

40

Image 40

Contents Page Features IntroductionControls and functions Line239 40 41 42 43 Table of contents Read this first 11 toChecking the package contents StepSetting up the base unit Choose the best locationUsed only when second line Connect the base unitIf your dialing system is Set the switch to Choose the dialing modeIf you arent sure of your dialing system Preparing the battery pack Battery use time per charge When the battery charge becomes lowCleaning the battery contacts Do not use any liquids or solventsSetting up Caller ID options Entering your area code To selectBasics Making and receiving callsBasic 2-line operation Handset On Base Handset Off Base Base Only Auto Talk offAnswering a call from the base Answering a call from the handsetUsing the tone feature Making a call from the baseMaking a call from the handset Off-hook dialingFlash and Call Waiting Last number redialHandset BaseUsing the speakerphone mute feature Placing a call on holdUsing the page feature Adjusting the volume controlsTraveling out-of-range Selecting a different channelLine features Base ringer volumeBase speaker volume Line operationWay conferencing Conference Line 1 Line Paging from the base to handset Using your EXI 7926 intercomPaging from the handset to base Using the speakerphone Transferring callsStoring a phone number in memory Memory featuresOn the handset On the base Editing a phone number in memory Press delete/flash to remove any unwanted Erasing a number from memory From the handsetFrom the base Using memory dialing At the baseCaller ID features Using Caller IDScreening your calls Reviewing Caller ID name/numbersCalling a Caller ID name/number Storing a Caller ID number in a memory location Select Location screen appears. UseDeleting a Caller ID message Using Cidcw Caller ID with Call Waiting Deleting all Caller ID name/numbersHeadset installation Additional informationChanging the digital security code Headset JackMounting the base unit on a wall Standard wall plate mountingDirect wall plate mounting Installing the beltclip To attach the beltclip To remove the beltclipMaintenance Battery replacement and handlingWhen slightly dirty When very dirtyTroubleshooting Symptom SuggestionSpecifications GeneralBase unit HandsetIndex W, X, Y, Z