Uniden EXI 7926 Making a call from the base, Making a call from the handset, Off-hook dialing

Page 17

Basics (continued)

Making a call from the base

1 Press line 1 .

2 Dial the number on the keypad, or, use one of the memory features. (See Using memory dialing, page 32.)

3 When you finish the call, press line 1 to hang up.

line 1	line 2
	conference

mute hold

status

Making a call from the handset

Off-hook dialing

1	Pick up the handset.	line1	line2
2			mem
2	Press line 1 .
3	Dial the number on the keypad. Or use
	one of the memory features. (See Using
	memory dialing, page 32.)
4	When you finish the call, press line 1	or, return the handset to the base.

On-hook dialing

To call a number while the handset is in standby mode, dial the number on the keypad, or use one of the memory features. Press line 1 . (See Using memory dialing, page 32.)

Hint	AutoStandby automatically hangs up when you place the handset on the
	base. These is no need to press line 1 or line 2 to hang up.

Note If a line is in use, or a phone off the hook, the LCD screen reads “In Use Line 1”.

Using the tone feature

If you are dialing in the pulse mode and need to enter tone digits, press * /0/tone then enter the digits. Once the call has ended, tone mode is canceled and pulse dialing resumes.

tone

0oper

call id dn

up delete

Note The tone feature applies only when the base is set to pulse.

17

Image 17

Contents Page Introduction FeaturesLine2 Controls and functions39 40 41 42 43 Table of contents 11 to Read this firstStep Checking the package contentsChoose the best location Setting up the base unitConnect the base unit Used only when second lineIf you arent sure of your dialing system Choose the dialing modeIf your dialing system is Set the switch to Preparing the battery pack When the battery charge becomes low Battery use time per chargeCleaning the battery contacts Do not use any liquids or solventsSetting up Caller ID options To select Entering your area codeMaking and receiving calls BasicsBasic 2-line operation Handset On Base Handset Off Base Base Only Auto Talk offAnswering a call from the handset Answering a call from the baseMaking a call from the base Using the tone featureMaking a call from the handset Off-hook dialingLast number redial Flash and Call WaitingHandset BasePlacing a call on hold Using the speakerphone mute featureAdjusting the volume controls Using the page featureTraveling out-of-range Selecting a different channelBase ringer volume Line featuresBase speaker volume Line operationWay conferencing Conference Line 1 Line Paging from the handset to base Using your EXI 7926 intercomPaging from the base to handset Transferring calls Using the speakerphoneOn the handset Memory featuresStoring a phone number in memory On the base Editing a phone number in memory Press delete/flash to remove any unwanted From the handset Erasing a number from memoryFrom the base At the base Using memory dialingUsing Caller ID Caller ID featuresScreening your calls Reviewing Caller ID name/numbersCalling a Caller ID name/number Select Location screen appears. Use Storing a Caller ID number in a memory locationDeleting a Caller ID message Deleting all Caller ID name/numbers Using Cidcw Caller ID with Call WaitingAdditional information Headset installationChanging the digital security code Headset JackStandard wall plate mounting Mounting the base unit on a wallDirect wall plate mounting To attach the beltclip To remove the beltclip Installing the beltclipBattery replacement and handling MaintenanceWhen slightly dirty When very dirtySymptom Suggestion TroubleshootingGeneral SpecificationsBase unit HandsetW, X, Y, Z Index