Uniden EXI 7926 manual Placing a call on hold, Using the speakerphone mute feature

Page 19

Basics (continued)

Placing a call on hold

Use either the keypad on the handset or the keypad on the base.

1

2

To place line 1 on hold at the base, press hold . The line 1 LED turns from green

to red.

To place line 1 on hold at the handset, press call id/hold .

line 1	line 2
conference
mute	hold

call id dn

up delete

hold conf int'com flash

The following screen appears:
3 To pick up the call that is holding, press	(Hold)
3 To pick up the call that is holding, press	Line 1
line 1 on the base or handset.

Note Do not use the base and the handset keypads at the same time to place a call on hold.

Using the speakerphone mute feature

Your EXI 7926 allows you to mute your conversation from the base. This prevents the party you are speaking to from hearing what you, or someone else in the room, is saying.

For example, to use this privacy feature while using line 1.

1 Press mute . The line 1 LED flashes red.

•You can hear the party on line 1, but they cannot hear you.

line 1	line 2
	conference

mute hold

2 When you are ready to continue your conversation with the party on line 1, press

mute again. The line 1 LED changes to green.

line 1	line 2
	conference

mute hold

Note • If a line is in use, or a phone off the hook, the LCD screen reads “In Use Line 1 (or Line 2)”.

19

Image 19

Contents Page Introduction FeaturesLine2 Controls and functions39 40 41 42 43 Table of contents 11 to Read this firstStep Checking the package contentsChoose the best location Setting up the base unitConnect the base unit Used only when second lineIf your dialing system is Set the switch to Choose the dialing modeIf you arent sure of your dialing system Preparing the battery pack Do not use any liquids or solvents Battery use time per chargeWhen the battery charge becomes low Cleaning the battery contactsSetting up Caller ID options To select Entering your area codeHandset On Base Handset Off Base Base Only Auto Talk off BasicsMaking and receiving calls Basic 2-line operationAnswering a call from the handset Answering a call from the baseOff-hook dialing Using the tone featureMaking a call from the base Making a call from the handsetBase Flash and Call WaitingLast number redial HandsetPlacing a call on hold Using the speakerphone mute featureSelecting a different channel Using the page featureAdjusting the volume controls Traveling out-of-rangeLine operation Line featuresBase ringer volume Base speaker volumeWay conferencing Conference Line 1 Line Paging from the base to handset Using your EXI 7926 intercomPaging from the handset to base Transferring calls Using the speakerphoneStoring a phone number in memory Memory featuresOn the handset On the base Editing a phone number in memory Press delete/flash to remove any unwanted From the handset Erasing a number from memoryFrom the base At the base Using memory dialingReviewing Caller ID name/numbers Caller ID featuresUsing Caller ID Screening your callsCalling a Caller ID name/number Select Location screen appears. Use Storing a Caller ID number in a memory locationDeleting a Caller ID message Deleting all Caller ID name/numbers Using Cidcw Caller ID with Call WaitingHeadset Jack Headset installationAdditional information Changing the digital security codeStandard wall plate mounting Mounting the base unit on a wallDirect wall plate mounting To attach the beltclip To remove the beltclip Installing the beltclipWhen very dirty MaintenanceBattery replacement and handling When slightly dirtySymptom Suggestion TroubleshootingHandset SpecificationsGeneral Base unitW, X, Y, Z Index