Uniden EXI 7926 manual Flash and Call Waiting, Last number redial, Handset, Base

Page 18

Basics (continued)

Flash and Call Waiting

The flash function on the base and handset are independent of each other. If you have Call Waiting service and a call waiting tone sounds, press flash (or delete/flash on the handset) to accept the call. After a short pause you will hear the new caller. To return to the original caller, press flash (or delete/flash on the handset) again.

status

memory page/int'com redial/p flash

call id dn

up delete

hold conf int'com flash

sel/vol chan redial/p

Note The flash feature does not function when line 1 and line 2 are on a conference call. (See 3-way conferencing and 4-way conferencing, pages 22 and 23.)

Last number redial

The redial key redials the last number dialed. The redialed number can be up to 32 digits long.

1 Handset

Press line 1 or line 2 , then press redial/p . Or press redial/p , then

press line 1 or line 2 .

2 Base

Press line 1 or line 2 , then press redial/p .

hold conf int'com flash

sel/vol chan redial/p

status

memory page/int'com redial/p flash

• If any key is pressed before redial/p , the last number will not redial.

Tip The EXI 7926 has two independent last number redial memories; one in the handset, the other in the base.

18

Image 18

Contents Page Features IntroductionControls and functions Line239 40 41 42 43 Table of contents Read this first 11 toChecking the package contents StepSetting up the base unit Choose the best locationUsed only when second line Connect the base unitChoose the dialing mode If your dialing system is Set the switch toIf you arent sure of your dialing system Preparing the battery pack Cleaning the battery contacts Battery use time per chargeWhen the battery charge becomes low Do not use any liquids or solventsSetting up Caller ID options Entering your area code To selectBasic 2-line operation BasicsMaking and receiving calls Handset On Base Handset Off Base Base Only Auto Talk offAnswering a call from the base Answering a call from the handsetMaking a call from the handset Using the tone featureMaking a call from the base Off-hook dialingHandset Flash and Call WaitingLast number redial BaseUsing the speakerphone mute feature Placing a call on holdTraveling out-of-range Using the page featureAdjusting the volume controls Selecting a different channelBase speaker volume Line featuresBase ringer volume Line operationWay conferencing Conference Line 1 Line Using your EXI 7926 intercom Paging from the base to handsetPaging from the handset to base Using the speakerphone Transferring callsMemory features Storing a phone number in memoryOn the handset On the base Editing a phone number in memory Press delete/flash to remove any unwanted Erasing a number from memory From the handsetFrom the base Using memory dialing At the baseScreening your calls Caller ID featuresUsing Caller ID Reviewing Caller ID name/numbersCalling a Caller ID name/number Storing a Caller ID number in a memory location Select Location screen appears. UseDeleting a Caller ID message Using Cidcw Caller ID with Call Waiting Deleting all Caller ID name/numbersChanging the digital security code Headset installationAdditional information Headset JackMounting the base unit on a wall Standard wall plate mountingDirect wall plate mounting Installing the beltclip To attach the beltclip To remove the beltclipWhen slightly dirty MaintenanceBattery replacement and handling When very dirtyTroubleshooting Symptom SuggestionBase unit SpecificationsGeneral HandsetIndex W, X, Y, Z