Caller ID features (continued)
continued from previous page
6 Press call id/hold to return to standby.
call id dn | up delete |
hold conf int'com flash
Note Once you have viewed all of your Caller ID name/numbers and reach the “End of List” display, the message list does not cycle back to the beginning. You must press ¥up/int'com to view your previous name/numbers.
Calling a Caller ID name/number
1 Press . The Caller ID summary screen shows the number of new callers and total number of calls.
call id dn | up delete |
hold conf int'com flash
New Total
Line1 00 02
Line2 01 01
2 Use ¥up/int'com or dn »/conf to select “Line 1” or “Line 2” caller ID.
call id dn | up delete |
hold conf int'com flash
3 | Press | sel/vol to display the caller ID |
| message. | |
4 | Press | dn »/conf to scan forward. |
| Press | ¥up/int'com to scan backwards |
| through the list. | |
5 | Select the name/number that you would like | |
| to dial. |
|
6 | Press | line 1 . The number automatically dials. |
call id dn | up delete |
hold conf int'com flash
12/21 12:30PM 03 Schlitz Maren
line1line2
mem
Note For long distance calling, insert “1” by pressing 1 on the keypad before pressing line 1 .
34