Password Setup 102 PASSWORD LOCK | Panasonic WJ-HD100 specification

Panasonic WJ-HD100 Password Setup 102 PASSWORD LOCK, Setting Buzzer ON/OFF 105 KEYLOCK BUZ

●Password Setup

102 PASSWORD LOCK

A 5-digit password is entered to protect all settings, record- ed pictures, and operating status, or settings only from unauthorized access. While the LOCK indicator on the front panel is on, the LCD displays the message "Now Key Locked!" to warn unauthorized operators. If accessed in this condition, the buzzer beeps.

	TIMER	HDD	MEMORY CARD	DISP
	ALARM	FULL
OPERATE	SUSPEND	FULL
	DAYLIGHT	LOCK
	SAVINGS	LOCK		LCD

Turned on while the buttons are locked.

DISPLAY SELECT

LCD CONTRAST

Note: Select OFF when you do not need the button lock mode. When set to ON, the recorder enters the but- ton lock mode if neither a button nor the JogDial is operated within a period of five minutes.

3.Move the cursor to ALL or OPERATION with the up [▲] or down [▼] button.

ALL: Both normal operations and setup operations are allowed.

OPERATION: Normal operations only are allowed.

4.Press the JogDial.

The preset password appears. The default is “12345” for both ALL and OPERATION.

5.Select a number with the JogDial, then press it. The cursor moves one digit to the right.

6.Repeat step 5 above until all digits are entered.

7.Press the [SETUP/ESC] button to confirm the entered password. Go back to step 3 if you have not yet set the OPERATION password.

SYSTEM SETUP

FWD/REW MODE	SKIP&PLAY
PASSWORD LOCK	OFF
ALL→	*****
OPERATION→	*****
KEYLOCK BUZZER	OFF
RESET PULSE	HIGH
TIME ADJUSTING	SLAVE
SET TIME→	9:00
AUTO ERASING	OFF
	DISPLAY SELECT
	LCD CONTRAST
	DISPLAY SELECT
	LCD CONTRAST

1.Move the cursor to PASSWORD LOCK with the up [▲] or down [▼] button.

2.Select either ON or OFF with the JogDial. The default is OFF.

ON: Buttons are password protected against erroneous operation and tampering. When set to ON, the recorder enters the button lock mode if neither a button nor the JogDial is operated within a period of five minutes.

OFF: No password protection is applied unless the but- ton lock mode is enabled using the LCD button as described in the right column of this page.

●Setting Buzzer ON/OFF 105 KEYLOCK BUZ

SYSTEM SETUP

FWD/REW MODE		SKIP&PLAY
PASSWORD LOCK		OFF
	ALL→	*****
	OPERATION→	*****
KEYLOCK BUZZER		OFF
RESET PULSE		HIGH
TIME ADJUSTING		SLAVE
	SET TIME→	9:00
AUTO ERASING		OFF
			DISPLAY SELECT
			LCD CONTRAST

1.Move the cursor to KEYLOCK BUZZER with the up [▲] or down [▼] button.

2.Rotate the JogDial to select ON or OFF. The default is OFF.

ON: Buzzer beeps when unauthorized access takes place.

OFF: Buzzer does not sound.