Panasonic WJ-HD100 System Information, Parity Check 505 PARITY CHECK, Stop Bit 506 STOP BIT, None

2.Select the bit length with the JogDial. The default value is 8 bits.

7:7 bits

8:8 bits; select 8 when using the PS•DATA protocol.

●Parity Check

505 PARITY CHECK

DATA BIT	8
PARITY CHECK	NONE
STOP BIT	1
WAIT TIME	OFF
	DISPLAY SELECT
	LCD CONTRAST

1.Move the cursor to PARITY CHECK with the [▲] or [▼] button.

2.Select the check mode with the JogDial. The default is NONE.

NONE: No parity check

EVEN: Even parity

ODD: Odd parity

●Stop Bit

506 STOP BIT

DATA BIT	8
PARITY CHECK	NONE
STOP BIT	1
WAIT TIME	OFF
	DISPLAY SELECT
	LCD CONTRAST

1.Move the cursor to STOP BIT with the [▲] or [▼] button.

2.Select the number of stop bits with the JogDial. The default is 1.

1:1 bit

2:2 bits

●Wait Time

507 WAIT TIME

The unit retransmits data after waiting the specified time if there is no response from the connected device. The default is OFF.

DATA BIT	8
PARITY CHECK	NONE
STOP BIT	1
WAIT TIME	OFF
	DISPLAY SELECT
	LCD CONTRAST

1.Move the cursor to WAIT TIME with the [▲] or [▼] but- ton.

2.Select the waiting time with the JogDial. The default is OFF.

OFF : Retransmission is disabled

100 MS: 100 m seconds

200 MS: 200 m seconds

1 S : 1 second

■SYSTEM INFORMATION

SYSTEM INFORMATION

HDD	HOUR METER	1000H	GB
HDD	CAPACITY	.
DEFAULT→		SET→

In the SYSTEM INFORMATION window, HDD HOUR METER shows how many hours the digital hard disk recorder has been operated in Playback, Recording and Idle. The built-in HDD needs replacement when the hour meter reads around 30 000 H.

HDD CAPACITY indicates the total usable capacity of the built-in hard disk.

DEFAULT enables the recorder to restore all setup data to the default values. See page 18 for details.

31