Panasonic WJ-HD100 Rec Setup, Recording Mode 201 REC MODE, Recording Field Rate 202 REC RATE

■REC SETUP

Picture quality and field rate are selected as a set or indi- vidually.

●Recording Mode 201 REC MODE

Select one of the following 5 basic options: super fine (SF, level 10), fine (FQ, level 8), normal (NQ, level 7), long-time recording (EX, level 5) and optional (SP). If combined with audio (A) recording, the number or modes doubles as shown below. The selected recording mode determines the remaining recording time which is displayed on the monitor and on the LCD.

In the SP mode, the field rate and picture quality are vari- able and can be selected at option in the range of 0.1 to 15 fps and level 1 to 10, respectively. After the recording mode has been selected, the available time is calculated and displayed. "xxx" in the table is replaced with the calcu- lated available time.

●Recording Field Rate 202 REC RATE

The field rate or number of fields per second can be select- ed in SP mode. The higher the field rate, the more informa- tion the recording will contain.

REC MODE		SP- 12H
REC	RATE		15FPS
REC	QUALITY		10(1-	10)

DISPLAY SELECT

LCD CONTRAST

1.Move the cursor to REC RATE with the [▲] or [▼] button.

2.Select the desired rate (from 0.1 fps to 15 fps) with the JogDial. The default value is 15 fps.

REC SETUP
REC MODE
		SF-	12H
REC RATE		15FPS
REC QUALITY		10(1-10)
DISK END	MODE	STOP
DISK END	BUZZER	ON
JOG/EXT REC		JOG CLICK
REC MODE		SF-	12H

DISPLAY SELECT

LCD CONTRAST

●Recording Quality 203 REC QUALITY

A picture quality from level 1 to 10 can be selected in SP mode. The higher the level number, the better the picture quality will be.

REC MODE		SP- 12H
REC	RATE		15FPS
REC	QUALITY		10(1-10)

DISPLAY SELECT

LCD CONTRAST

1.Move the cursor to REC MODE with the [▲] or [▼] but- ton.

2.Select the desired mode with the JogDial. The default is SF-12H.

Rec Mode	Quality	Audio Record	Note
SF-xxxH	Super Fine (10)	N/A
FQ-xxxH	Fine (8)	N/A
NQ-xxxH	Normal (7)	N/A
EX-xxxH	Long time (5)	N/A
SF-AxxxH	Super Fine (10)	Available
FQ-AxxxH	Fine (8)	Available
NQ-AxxxH	Normal (7)	Available
EX-AxxxH	Long time (5)	Available
SP-AxxxH	Optional setup	Available	Field rate, quality
			selected optionally
SP-xxxH	Optional setup	N/A	Field rate, quality
			selected optionally

"xxx" in the table will be replaced by a calculated recording time of 12, 18, 24, 48, 72, 96, 120, 170, 180, 240, 480 or 960 hours. "xxx" for SP is specified in REC MODE table in ADDENDUM attached to the manual.

1.Move the cursor to REC QUALITY with the [▲] or [▼] button.

2.Select the desired quality (from level 1 to 10) with the JogDial. The default value is level 10.

24