CLOCK→ JAN 7.00 | 8:09 |
| |
TIME&DATE | TYPE1 24H | ||
TIME&DATE DISP.ON |
|
| |
TIME&DATE | |||
STATUS DISP. | ON |
|
|
STATUS POSI. |
| ||
HDD FULL | 1% |
|
|
|
|
|
|
DISPLAY SELECT
LCD CONTRAST
1.Move the cursor to STATUS POSI. with the [▲] or [▼] button.
2.Select the desired position with the JogDial. The default is
CENTER: Displays it in the center.
OFF: Status display is disabled.
●HDD FULL Selection 007 HDD FULL
Set the disk capacity from 1 % to 99 % to warn the operator that the available capacity is nearing the end. There are two warning levels. First the FULL indicator on the front panel blinks when the remaining disk capacity has reached the preset value. Finally the buzzer beeps when the disk is full, provided that the DISK END BUZZER parameter in the REC SETUP menu is set to ON. At the same time the FULL indi- cator turns on.
CLOCK→ JAN 7.00 8:09
TIME&DATE TYPE1 24H
TIME&DATE DISP.ON
TIME&DATE
STATUS | DISP. | ON | |
STATUS | POSI. | ||
HDD FULL | 1% |
| |
DISPLAY SELECT
LCD CONTRAST
1.Move the cursor to HDD FULL with the [▲] or [▼] but- ton.
2.Select the desired value with the JogDial. The default value is 1 %.
1% to 99 %: The FULL indicator blinks when the remaining disk capacity reaches the selected value.
■SYSTEM SETUP
●Quick Play Mode Selection 101 FWD/REW MODE
Picture search is available in quick forward and backward playback. Set the playback picture rate (FWD/REW MODE) in the SYSTEM SETUP window to SKIP or SKIP&PLAY. The playback sequence for each mode is shown below.
SKIPSkip
Data recorded on the Disk
Time
Image displayed
on the Monitor
Expanded
1 Field Still ImageTime
SKIP&PLAY Skip Play
Data recorded on the Disk
Time
Image displayed |
|
|
|
|
|
|
on the Monitor |
|
|
|
|
| Expanded |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
| A Series of 32 Fields |
|
| Time |
|
|
|
|
|
|
1.Hold down the [SETUP/ESC] button for 2 seconds to display the setup menu on the monitor.
2.Press the down [▼] button repeatedly until the SYSTEM SETUP window appears. (You can switch through the setup menus by repeatedly pressing the up [▲] or down [▼] button.)
3.Move the cursor to FWD/REW MODE with the up [▲] or down [▼] button.
4.Rotate the JogDial to select the desired parameter. The default is SKIP&PLAY.
[SKIP]: One field still picture is picked up from the disk and displayed on the monitor as shown above. This is quicker than skip and play.
[SKIP&PLAY]: A
SYSTEM SETUP
FWD/REW MODE | SKIP&PLAY |
| |||||
PASSWORD LOCK | OFF |
| |||||
| ALL→ | ***** |
| ||||
| OPERATION→ | ***** |
| ||||
KEYLOCK BUZZER | OFF | ||||||
RESET PULSE | HIGH | ||||||
TIME ADJUSTING | SLAVE | ||||||
| SET TIME→ | 9:00 |
| ||||
AUTO ERASING | OFF | ||||||
|
|
|
|
|
| DISPLAY SELECT | |
|
|
|
|
|
| LCD CONTRAST | |
|
|
|
|
|
| ||
|
|
|
|
|
| ||
|
|
|
|
|
| ||
|
|
|
|
|
| ||
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
5.Press the [SETUP/ESC] button for 2 seconds to quit setup.
21