#2Status Out Terminal
These terminals supply the following status information:
PLAY OUT, REC OUT, AUTO OFF OUT, DISK END OUT.
AUTO OFF OUT: AUTO OFF OUT signal turns active (active when low), and playback or recording stops when a temperature error is detected inside the unit. Turn the power off and wait for a while until you turn it on again to reset the error.
#3Series Record Terminal
Connect these terminals when using multiple units in series or loop connection.
#4Alarm Terminal
These terminals supply and receive the following alarm related information: ALARM RECALL, ALARM OUT,
ALARM RECOVER OUT, ALARM RESET IN, ALARM IN.
#5Cooling Fan
Do not block the air flow of this cooling fan through the openings on both sides of the top cover to prevent the appliance from overheating.
#6Power Switch [POWER ON OFF]
Turns the power on and off. The OPERATE indicator on the front panel lights while the power switch is turned on.
#7Signal Ground [SIGNAL GND]
Connect with the terminals of other devices as neces- sary to avoid grounding loop and noise.
#8Power Cord
8