ENGLISH VERSION
ADDENDUM
The following changes and additions have been applied to the
Default setting Changes
●REC SETUP windows on page 17, 24, 25 and 26:
The default setting for DISK END MODE is changed from [STOP] to [CONTINUE].
The fourth line of text on page 26 is also changed from STOP to CONTINUE well.
Changes
●System Info window on Page 17 & 31: VERSION display has been changed.
●Folders & Files on page 40: Descriptions are replaced with the following.
In each COPY TO CARD operation, a folder with a
SYSTEM INFORMATION
HDD | HOUR METER | 1000H |
|
HDD | CAPACITY | . | GB |
DEFAULT→ | SET→ |
| |
VER x.xx(x.xx x.xx x.xx)
HD100
000001 000001.jpg 000002.jpg
000003.jpg
Blue.jpg
Viewer.htm
000002
●Communication Protocol, Setup Control on page 48 has been corrected.
Item | Transmission Command (ASCII) | Response (ASCII) | Parameter (ASCII) | |
Cursor Moves | DCR:n1n2 | DCR | n1=A Right | |
|
|
| n1=C Upward | |
|
|
| n1=E Left | |
|
|
| n1=G Downward | |
|
|
| n2=1 Move a step | |
|
|
| n2=2 Move multi steps | |
|
|
| n1n2=+1 Select parameter(+) | |
|
|
| ||
|
|
| n1n2=PD Move to lower layer | |
|
|
| n1n2=P+ Move to upper layer (deletion) | |
|
|
| n1n2=P- Turn a newer page (deletion) | |
|
|
| n1n2=PU Turn an older page (deletion) | |
|
|
| n1n2=PU Move to upper layer (addition) | |
|
|
|
|
|
Setup | MSU:n | MSU (deletion) | n=0 | End setup |
|
| MSU:n (addition) | n=1 | Begin setup |