iPod playback | 03 |
Playing your iPod
Caution
•When your iPod is connected to this unit and you wish to operate the iPod by touching it directly, be sure to hold the iPod steady with the other hand to prevent malfunctions due to faulty contacts.
When an iPod is connected to this unit, iPod indicator will flash while the unit confirms the iPod connection and retrieves data from the iPod. When INPUT is pressed to change the input to iPod, the connection is completed and iPod indicator will light steadily.1
Playback and volume level setting for iPod music and images can be performed from this unit or the iPod itself.
•When using the iPod to adjust sound volume, the adjustment will be applied only
to the sound produced from this unit’s speakers.2 If the iPod is disconnected from this unit, the iPod’s sound volume will return to its original setting.
The following operations are possible for iPod, using the remote control.
Button What it does
/ Starts normal playback and pauses/ unpauses playback.
Press to skip to the start of the current file, then previous files. Press and hold to start fast reverse scanning.
Press to skip to the next file. Press and hold to start fast forward scanning.
Using the tone controls
Adjust the sound tone. Adjustment is performed from the iPod’s screen.2 The settings performed here are reflected in the BASS/TREBLE settings on this unit.
iPod nano or iPod classic:
1Select ‘Speaker’ from the top menu.
2Select ‘Tone control’.
3Select a setting.
iPod touch or iPhone:3
1Select ‘Settings’ from the home menu.
2Select ‘Speaker’.
3Select ‘Tone control’.
4Select a setting.
Select one of the following:
•Flat – Revert sound to its natural state.
•Bass ON – Emphasize bass sound.
•Treble ON – Emphasize treble sound.
•Bass/Treble ON – Emphasizes bass and treble sounds.
English Deutsch Français Italiano Nederlands Español
VOLUME Use to set the listening volume.
+/–
Note
1If an iPod is connected when this unit is in standby mode, the power will turn on and iPod input will be selected automatically.
2These adjustments are applied to all inputs to the unit.
3This setting may not be supported, depending on the iPod touch or iPhone software version.
11
En