Panasonic WJ-HD200 manual Initializing All Contents & Setup Data, Initializing Setup Data

■INITIALIZING

You can initialize either all disk contents including image data and setup data.

●Initializing All Contents & Setup Data

Warning! The following are irrevocable procedures. We strongly recommend that you copy important pictures from the hard disk.

ON

OFF

ON

1 2 3 4 5 6

MODE

1.Press the [REC STOP] button on [STOP] button to stop recording or playback.

2.Turn off the power.

3.Set MODE switches #1 through 4 on the rear panel as follows:

#1: ON

#2: OFF

#3: OFF

#4: ON

4.Turn on the power.

The disk contents and setup data are initialized.

●Initializing Setup Data

SYSTEM INFORMATION

HDD1 HOUR METER 10000H

HDD2 HOUR METER 10000H

HDD CAPACITY		135.95G
DEFAULT→		SET→
SYSTEM	VERSION	X.XX
SYSTEM	LOGO

1.Open the SYSTEM INFORMATION window, then move the cursor to DEFAULT.

2.Press the JogDial to move the cursor to SET.

3.Press the JogDial.

4.Select YES with the JogDial.

YES: Initializing of setup data is enabled.

5.Press the JogDial.

SET DONE appears on the monitor after initializing.

6.Press the [SETUP/ESC] button. The cursor moves to DEFAULT.

7.Hold down the [SETUP/ESC] button for 2 seconds to quit the setup.

Note: After closing the setup menu, the system may automatically restart if any parameter on the net- work has been changed.

NOW FORMATTING HDD

Note: When finished, the monitor will display the cam- era image and status information while the indicator on the selected CAM SEL button is lit. Be sure to carry out the next step, #5.

5.Turn off the power, and return the MODE switches to the previous positions. Then, turn on the recorder.

24