Panasonic WJ-HD200 manual Switcher Setup Switcher Setup

●IP Address IP ADDRESS

The default is “192.168.000.010”.

●Netmask NETMASK

The default is “255.255.255.000”.

●Gateway GATEWAY

The default is “192.168.000.001”.

■Switcher Setup SWITCHER SETUP

SWITCHER SETUP

START DISPLAY QUAD-4A

MULTI SEL MODE ALL

SEQUENCE SETUPO

CAMERA VIEW SETUPO

Video switcher functions are programmed in this menu setup.

●Start Display START DISPLAY

The image in the selected form will be displayed on the monitor when the recorder is turned on.

Single Image: CH 1 to CH 8

Quad Image: QUAD-4A (including 1-4), QUAD-4B

(including 5-8)

Multi Image: 9SCREEN (including 1-8)

Sequence: SPOT SEQ, MULTI SEQ

●Multiscreen Selection MULTI SEL MODE

When the [MULTI SCREEN SEL] button on the front panel is pressed, the monitor display will change as follows depending on the selection.

QUAD ONLY: QUAD-4A → QUAD-4B → QUAD-4A

ALL: QUAD-4A → QUAD-4B → 9SCREEN → QUAD-4A

●Sequence Setup SEQUENCE SETUP

	SEQUENCE SETUP
MULTI	SEQ	SETUPO
SEQUENCE		TIMING	INT
AUTO	SKIP		ON
SPOT SEQ SETUPO
SEQUENCE		TIMING	INT
AUTO	SKIP		ON

1.Move the cursor to SEQ SETUP in the SWITCHER SETUP menu, and press the JogDial.

The SEQ SETUP menu opens.

2.Select either MULTI SEQ SETUP or SPOT SEQ SETUP with the [D] or [C] button, and press the JogDial. The selected menu opens.

●Multiscreen Sequence Setup MULTI SEQ SETUP

Open the QUAD SEQ SETUP menu to program the sequence steps for displaying quad-split and single input images.

	MULTI SEQ SETUP
STEP	→	CAM	SEC
1		QUAD-4A	2S
2	→	QUAD-4B	2S
3	→	-	2S
4	→	-	2S
5	→	-	2S
6	→	-	2S
7	→	-	2S
8	→	-	2S

1.Move the cursor to the desired step using the [D] or [C] button.

2.Select a camera number with the JogDial, and press the JogDial.

The default camera number is identical to the step num- ber.

Available camera: From 1 to 8 individually, 4A(1-4), or 4B(5-8)

Note: The recorder will skip the step you assigned “–”.

3.Select duration for the step with the JogDial, and press the JogDial.

Available duration: 2-30 S

39