Panasonic WJ-HD200 manual Communication Setup, Serial Setup Serial Setup, Protocol Protocol

Page 36

*

CAM1

Notes:

•VMD should be used with an ordinary camera input to the unit. Select [OFF] to avoid useless VMD when a video multiplexer or combination camera supplies the input to the unit.

•Set the ALARM SUSPEND to ON when VMD is unnecessarily activated during the VMD setup.

4.Set the upper-left end of the detection area. Move the asterisk to the right or left with the JogDial, and up or down by pressing the [D] or [C] button.

REW/FF

 

/

 

STEP

 

/

 

PUSH • PAUSE

SET

/

/

5.Press the JogDial to enter the upper-left end of the detection area. The asterisk position is highlighted.

6.Set the bottom-right end of the detection area similar to steps 3 and 4 above.

7.Press the JogDial. The area is highlighted.

Up to 4 areas can be selected. These may partially overlap. Repeat steps 3 to 6 to select more areas. To deselect an area, move the cursor to the upper-left end of the area, and press the JogDial.

q

e

w

r

■Communication Setup

COMMUNICATION SETUP

Communication parameters are set to match those of the connected devices and the system configuration. The serial port setup and network setup are made.

COMMUNICATION SETUP

SERIAL SETUPO

NETWORK SETUPO

■Serial Setup SERIAL SETUP

The SERIAL SETUP menu appears when it is selected in the COMMUNICATION SETUP menu.

SERIAL SETUP

PROTOCOL

 

PS•DATA

BAUD RATE

 

9600

DATA BIT

 

8

PARITY CHECK

NONE

STOP BIT

 

1

WAIT TIME

 

OFF

CTL-UNIT

ADDR

1

SYS-UNIT

ADDR

1

ALARM DATA

1S

CAM NO.SETUPO

 

Note: Parameters marked with * in the following pages are default settings applied to VCR.

●Protocol PROTOCOL

1.Move the cursor to PROTOCOL with the [D] or [C] but- ton.

2.Select a suitable protocol with the JogDial, and press the JogDial.

The default is PS• DATA.

PS• DATA: Select when the communication chain uses the PS• DATA protocol.

This selection enables the DATA terminal on the rear panel for communication.

VCR: Select when other than PS• DATA is used.

This selection enables the RS-232C terminal on the rear panel for communication.

Note: Parallel use of the DATA and RS-232C terminals is not possible.

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Operating Instructions Lightning flash with arrowhead symbol Important Safety Instructions Contents Features PrefaceTrademarks Precautions Front View 4HDD Access Indicator HDD 5FULL Indicator Full6Error indicator Error 7Stop and Setup/Escape Button Stop SETUP/ESC@6Audio Out @7Video Out Video OUTRear View Installation Installing the Optional HDDPlaces to avoid About mountingMounting in the Rack Connections & DIP SW Setting Basic SystemPS Data System System CamerasPersonal computers can access the WJ-HD200 via the network Network SystemALARM/REMOTE Connection Connection with the Camera SiteConnection with the Monitors System Camera ConnectionAlarm Connection Time Adjusting ConnectionExternal Recording Connection Serial Port Connections RS232C ConnectionPS Data Connection 10/100BASE-T Port Connection Case 2 Exclusively with System ControllerSystem Mode Data Port TerminationSetup Procedures Prior to SetupTurning On the Power Turning Off the PowerButtons and Dials Used for Setup Displaying WJ-HD200 Main MenuClosing WJ-HD200 Main Menu JogDial Counter-clockwise Decreases the parameterMenu Tree Initializing All Contents & Setup Data Initializing Setup DataInitializing Timer Recording Setup Timer REC Program 1-4 Setup Program 1- 4 SetupMain Menu WJ-HD200 Main Menu Recording Mode Setup Prog 1-4 no -4 Setup Alarm Recording Mode Setup ALM REC ModePre-alarm Recording PRE ALM REC Post-alarm Recording Post ALM REC Trigger Action Setup Trigger Action SetupCamera Recording Setup CAM REC Setup Dynamic Recording Dynamic RECManual Recording Setup REC Setup Externally Specified Recording Mode EXT RECDisplay Setup Display Setup Clock ClockTime & Date Display Time & Date Disp Status Display Status DispStatus Position Status Posi Time & Date Position Time & Date PosiDisk Capacity Warning HDD Full Disk Check HDD CheckRemote LED Remote LED System Setup System Setup Password Lock Setup Password Lock~ 9 a ~ Z ! % Keylock Buzzer Setup Keylock Buzz Skip Alarm Recall SetupSimultaneous Recording & Playback Alteration Detection Setup Disk End Mode SetupPlay Priority Setup Play Priority Disk End Buzzer Disk END BuzzTime Adjust Setup Time Adjusting Auto Erasing Setup Auto Erasing14, 30, 45, 60, 90, 120, 150, 180DAYS Same as Alarm Setup Alarm Setup Alarm Buzzer Alarm BuzzMonitor Mode Monitor Mode Video Motion Detection VMD SetupCommunication Setup Communication SetupSerial Setup Serial Setup Protocol ProtocolAlarm Data Alarm Data exclusive for PS Data Baud Rate Baud RateData Bit Data BIT Parity Check Parity CheckNetwork Setup Network Setup Switcher Setup Switcher Setup Spot Sequence Setup Spot SEQ Camera View Setup Camera ViewMulti SEQ Setup Available camera From 1 toSystem Information System InformationOperating Procedures Controlling Video Inputs & MonitorsOn the Spot Monitor On the Multi-screen MonitorViewing a Single Live Sequence Viewing a Multi-screen LiveViewing Quad Live Sequence Alarm Control Function Alarm InputAlarm Output Resetting Alarm Suspending Alarm Input Alarm Log Recall & SearchPressing REC Stop Button To brows through the logInternal Timer Recording Power-on RecordingRecording To search for playbackAlarm Recording Manual RecordingAlarm Search Playback PlaybackNormal Playback Skip PlaybackTime & Date Search Playback Multi-screen PlaybackPassword Verification LOCK/UNLOCK ButtonsEnabling Button Lock WJ-HD200 Preparations BrowserDisplay Connection Direct Connection with a PCSystem Expansion Connection with a Client PC via HubMain Page and Control Panel About Picture QualityRecorder Status Displayed Quality WJ-HD200 Setup To Access Setup MenusTimer Setup Timer Setup Main Setup MenuProgram Assignment Timer REC Programming Program SetupRecording Mode Setup Prog 1-4 no -4 SET Assignable Programs PROG1 Prog 4, OFFTrigger Action Setup Trigger Action Setup Camera Recording Setup CAM REC SetupMode Mode Manual Recording Setup REC SetupExternally Specified Recording Mode EXT REC Setup Camera Title Camera Title System Setup System Setup Password Operation Password Operation Skip Alarm Recall Skip Alarm RecallDisk End Mode Disk END Mode Time Adjusting Time AdjustingVideo Motion Detector Setup VMD SetupSerial Port Setup Serial Port SetupCamera Number Setup CAM NO. Setup only for Psdata Multi Sequence Setup Multi Sequence Setup Spot Sequence Setup Spot Sequence Setup InformationCamera View Setup Camera View Setup System Log System LOG Network Configuration User Setup User SetupHost Setup Host Setup FTP Client Setup FTP Client Setup FTP Send by Periodic Timer FTP Send by Periodic TimerMail Setup Mail Setup Network Video Setup Network Video SetupOperating WJ-HD200 Main PanelAlarm Reset button Alarm Reset Main Control PanelCamera Selection button Camera Select Multiscreen Selection ButtonTime & Date Search button Time&Date Search Camera Control View button Camera Control ViewPAN/TILT Control Left Right DownAlarm List Troubleshooting Select ModeWhen accessing via the network Phenomenon CauseSpecifications & Appendix Specifications Standard Accessories Remote Control From System Controller AppendixMenu Daylight Savings ON/OFFTransmission Command Response CommandRS-232C Communication Protocol Command Table Alarm ControlBasic Operation Setup Control Miscellaneous ControlData Log Control Media ControlInquiry QKMHDD Maintenance When to Maintain HDD Who to Maintain HDDPower-on Procedures When Full Indicator is Lit Resetting Disk End When Error Indicator is LitDisk Menu Abbreviation Status Required CapacityDisk Menu Auto-removeRemoving Logical Link Remove Link Formatting HDD HDD FormatRestarting Restart NOW Formatting HDD Format →SET DoneHttp Download and Viewing Images Mail Contents N0103-0 V8QA6017AN

WJ-HD200 specifications

The Panasonic WJ-HD200 is a versatile and robust digital video recorder (DVR) designed primarily for high-quality surveillance applications. This device stands out for its exceptional recording capabilities, exemplifying Panasonic’s commitment to innovation in video technology.

One of the main features of the WJ-HD200 is its ability to support multiple video input channels. This DVR can accommodate up to 16 cameras simultaneously, making it an ideal choice for larger installations requiring comprehensive monitoring. Its capability to handle various camera types, including analog and IP cameras, enhances its flexibility and usability in diverse environments.

Another significant characteristic of the WJ-HD200 is its high-resolution recording. The device allows for real-time recording at a resolution of up to 720 x 480 pixels, ensuring that captured footage remains sharp and detailed. Users can adjust bit rates and frame rates according to specific surveillance needs, providing tailored video quality without sacrificing storage space or clarity.

A notable feature is the integration of advanced motion detection technology. This allows the WJ-HD200 to start recording only when motion is detected, optimizing storage usage and making it easier for users to review footage when needed. Coupled with this is the device’s intelligent search functionality, which enables quick navigation through recorded content by identifying motion events, thus saving time during investigations.

The WJ-HD200 utilizes a RAID (Redundant Array of Independent Disks) configuration, which improves data reliability and redundancy. This technology minimizes the risk of data loss due to disk failure, ensuring continuous operation and security for vital footage. Moreover, the DVR supports efficient data management with a built-in networking capability. Users can remotely access the system via a network connection, allowing for real-time monitoring and management from virtually anywhere.

Finally, the user-friendly interface of the WJ-HD200 further enhances its appeal. The system is designed for easy setup and operation, featuring a logical menu structure that simplifies navigation. With various output options, including VGA and composite outputs, users can connect the DVR to different display systems effortlessly.

In summary, the Panasonic WJ-HD200 combines high channel capacity, exceptional recording quality, advanced motion detection, reliable storage solutions, and user-friendly features. This DVR is a solid choice for anyone seeking a dependable and efficient surveillance solution.
Top Page Image Contents