Panasonic WJ-HD200 Time & Date Search button Time&Date Search, PAN/TILT Control, Left Right Down

Page 73

8Time & Date Search button (Time&Date Search)

Clicking the button will display the time and date search dialog.

1.Specify the date, and time.

2.Click the [OK] button.

The image will be searched, and displayed in the image area.

Note: Searching may take 18 seconds at worst particularly when the recorder runs simultaneous recording and playback, and/or when the targeted image has a small size.

8Camera Control View button (Camera Control View)

Clicking the [Camera Control View] button opens the window.

Camera Select button displays the live image of the selected camera number.

Main Control Panel tab returns the window back to the main control panel.

ZOOM (WIDE/TELE) buttons zoom in or out the image.

FOCUS (FAR/NEAR/AUTO) buttons adjust the focus of the image. When AUTO is clicked, the camera will adjust the focus by itself.

IRIS (CLOSE/OPEN/RESET) buttons adjust the iris of the image. When RESET is clicked, the iris will return to the factory default setting.

AUTO PAN (ON/OFF) buttons allow the camera to turn the preset range endlessly.

PRESET allows the camera to turn to the preset posi- tion specified by the number.

PAN/TILT Control:

Clicking the desired direction in the image display area will move the camera if it is mounted on a pan/tilt table. The image display area is assigned panning/tilting function together with the mouse click. Each of 25-split (5x5) areas is invisible, but represents moving direc- tions: up, down, right or left.

UP

LEFT RIGHT

DOWN

74

Page 72 Page 74
Image 73
Page 72 Page 74
Contents Operating Instructions Lightning flash with arrowhead symbol Important Safety Instructions Contents Preface FeaturesTrademarks Precautions Front View 5FULL Indicator Full 4HDD Access Indicator HDD6Error indicator Error 7Stop and Setup/Escape Button Stop SETUP/ESC@7Video Out Video OUT @6Audio OutRear View Installing the Optional HDD InstallationPlaces to avoid About mountingMounting in the Rack Basic System Connections & DIP SW SettingSystem Cameras PS Data SystemNetwork System Personal computers can access the WJ-HD200 via the networkConnection with the Camera Site ALARM/REMOTE ConnectionConnection with the Monitors System Camera ConnectionTime Adjusting Connection Alarm ConnectionExternal Recording Connection RS232C Connection Serial Port ConnectionsPS Data Connection Case 2 Exclusively with System Controller 10/100BASE-T Port ConnectionData Port Termination System ModePrior to Setup Setup ProceduresTurning On the Power Turning Off the PowerDisplaying WJ-HD200 Main Menu Buttons and Dials Used for SetupClosing WJ-HD200 Main Menu JogDial Counter-clockwise Decreases the parameterMenu Tree Initializing Setup Data Initializing All Contents & Setup DataInitializing Program 1-4 Setup Program 1- 4 Setup Timer Recording Setup Timer RECMain Menu WJ-HD200 Main Menu Alarm Recording Mode Setup ALM REC Mode Recording Mode Setup Prog 1-4 no -4 SetupPre-alarm Recording PRE ALM REC Trigger Action Setup Trigger Action Setup Post-alarm Recording Post ALM RECCamera Recording Setup CAM REC Setup Dynamic Recording Dynamic RECExternally Specified Recording Mode EXT REC Manual Recording Setup REC SetupDisplay Setup Display Setup Clock ClockStatus Display Status Disp Time & Date Display Time & Date DispStatus Position Status Posi Time & Date Position Time & Date PosiDisk Check HDD Check Disk Capacity Warning HDD FullRemote LED Remote LED Password Lock Setup Password Lock System Setup System Setup~ 9 a ~ Z ! % Skip Alarm Recall Setup Keylock Buzzer Setup Keylock BuzzSimultaneous Recording & Playback Disk End Mode Setup Alteration Detection SetupPlay Priority Setup Play Priority Disk End Buzzer Disk END BuzzAuto Erasing Setup Auto Erasing Time Adjust Setup Time Adjusting14, 30, 45, 60, 90, 120, 150, 180DAYS Same as Alarm Buzzer Alarm Buzz Alarm Setup Alarm SetupMonitor Mode Monitor Mode Video Motion Detection VMD SetupCommunication Setup Communication SetupSerial Setup Serial Setup Protocol ProtocolBaud Rate Baud Rate Alarm Data Alarm Data exclusive for PS DataData Bit Data BIT Parity Check Parity CheckNetwork Setup Network Setup Switcher Setup Switcher Setup Camera View Setup Camera View Spot Sequence Setup Spot SEQMulti SEQ Setup Available camera From 1 toSystem Information System InformationControlling Video Inputs & Monitors Operating ProceduresOn the Spot Monitor On the Multi-screen MonitorViewing a Multi-screen Live Viewing a Single Live SequenceViewing Quad Live Sequence Alarm Input Alarm Control FunctionAlarm Output Resetting Alarm Alarm Log Recall & Search Suspending Alarm InputPressing REC Stop Button To brows through the logPower-on Recording Internal Timer RecordingRecording To search for playbackManual Recording Alarm RecordingPlayback Alarm Search PlaybackNormal Playback Skip PlaybackMulti-screen Playback Time & Date Search PlaybackLOCK/UNLOCK Buttons Password VerificationEnabling Button Lock WJ-HD200 Browser PreparationsDisplay Direct Connection with a PC ConnectionSystem Expansion Connection with a Client PC via HubAbout Picture Quality Main Page and Control PanelRecorder Status Displayed Quality To Access Setup Menus WJ-HD200 SetupTimer Setup Timer Setup Main Setup MenuProgramming Program Setup Program Assignment Timer RECRecording Mode Setup Prog 1-4 no -4 SET Assignable Programs PROG1 Prog 4, OFFCamera Recording Setup CAM REC Setup Trigger Action Setup Trigger Action SetupMode Mode REC Setup Manual Recording SetupExternally Specified Recording Mode EXT REC Setup Camera Title Camera Title System Setup System Setup Skip Alarm Recall Skip Alarm Recall Password Operation Password OperationDisk End Mode Disk END Mode Time Adjusting Time AdjustingVMD Setup Video Motion Detector SetupSerial Port Setup Serial Port SetupCamera Number Setup CAM NO. Setup only for Psdata Multi Sequence Setup Multi Sequence Setup Sequence Setup Information Spot Sequence Setup SpotCamera View Setup Camera View Setup System Log System LOG User Setup User Setup Network ConfigurationHost Setup Host Setup FTP Send by Periodic Timer FTP Send by Periodic Timer FTP Client Setup FTP Client SetupNetwork Video Setup Network Video Setup Mail Setup Mail SetupMain Panel Operating WJ-HD200Main Control Panel Alarm Reset button Alarm ResetCamera Selection button Camera Select Multiscreen Selection ButtonCamera Control View button Camera Control View Time & Date Search button Time&Date SearchPAN/TILT Control Left Right DownAlarm List Select Mode TroubleshootingWhen accessing via the network Phenomenon CauseSpecifications & Appendix Specifications Standard Accessories Appendix Remote Control From System ControllerMenu ON/OFF Daylight SavingsResponse Command Transmission CommandRS-232C Communication Protocol Alarm Control Command TableBasic Operation Miscellaneous Control Setup ControlData Log Control Media ControlQKM InquiryWhen to Maintain HDD Who to Maintain HDD HDD MaintenancePower-on Procedures When Error Indicator is Lit When Full Indicator is Lit Resetting Disk EndAbbreviation Status Required Capacity Disk MenuDisk Menu Auto-removeFormatting HDD HDD Format Removing Logical Link Remove LinkNOW Formatting HDD Format →SET Done Restarting RestartHttp Download and Viewing Images Mail Contents N0103-0 V8QA6017AN

WJ-HD200 specifications

The Panasonic WJ-HD200 is a versatile and robust digital video recorder (DVR) designed primarily for high-quality surveillance applications. This device stands out for its exceptional recording capabilities, exemplifying Panasonic’s commitment to innovation in video technology.

One of the main features of the WJ-HD200 is its ability to support multiple video input channels. This DVR can accommodate up to 16 cameras simultaneously, making it an ideal choice for larger installations requiring comprehensive monitoring. Its capability to handle various camera types, including analog and IP cameras, enhances its flexibility and usability in diverse environments.

Another significant characteristic of the WJ-HD200 is its high-resolution recording. The device allows for real-time recording at a resolution of up to 720 x 480 pixels, ensuring that captured footage remains sharp and detailed. Users can adjust bit rates and frame rates according to specific surveillance needs, providing tailored video quality without sacrificing storage space or clarity.

A notable feature is the integration of advanced motion detection technology. This allows the WJ-HD200 to start recording only when motion is detected, optimizing storage usage and making it easier for users to review footage when needed. Coupled with this is the device’s intelligent search functionality, which enables quick navigation through recorded content by identifying motion events, thus saving time during investigations.

The WJ-HD200 utilizes a RAID (Redundant Array of Independent Disks) configuration, which improves data reliability and redundancy. This technology minimizes the risk of data loss due to disk failure, ensuring continuous operation and security for vital footage. Moreover, the DVR supports efficient data management with a built-in networking capability. Users can remotely access the system via a network connection, allowing for real-time monitoring and management from virtually anywhere.

Finally, the user-friendly interface of the WJ-HD200 further enhances its appeal. The system is designed for easy setup and operation, featuring a logical menu structure that simplifies navigation. With various output options, including VGA and composite outputs, users can connect the DVR to different display systems effortlessly.

In summary, the Panasonic WJ-HD200 combines high channel capacity, exceptional recording quality, advanced motion detection, reliable storage solutions, and user-friendly features. This DVR is a solid choice for anyone seeking a dependable and efficient surveillance solution.
Top Page Image Contents