Panasonic WJ-HD200 manual Resetting Alarm

Page 45

●Monitor Display

There are two monitoring modes, alarm associated (SPOT) mode and alarm ignore (OFF) mode, depending on the selection for MONITOR MODE in the ALARM SETUP menu. Typical cases are described below for each setup.

Alarm Associated Mode

•The image of the alarm-activated input is displayed on the multi-screen monitor in a single spot mode, inter- rupting whatever the live, playback, single or multiple image previously displayed. When a new alarm is received, the lately activated input image will be dis- played.

•The camera title and “ALARM” indication on the monitor will be alternately displayed while blinking. For example “CH1 ALARM” when an alarm is received from CH1, will be displayed on the monitor.

CAM1

CH1 ALARM

•When a camera signal loss has occurred, the monitor display switches to a blackout screen with the channel number indication, for example “CH 1 LOSS”.

CAM1

CH1 LOSS

Alarm Ignore Mode

•The images being displayed will remain even when an alarm arises, but “ALARM” status indication will appear.

The following outputs for each channel will function or not depending on the setting in the TRIGGER ACTION SETUP menu.

•The following will not function when OFF is selected for the channel.

•The following will function when REC&ALM is selected for the channel.

•Only alarm recording will function when REC is selected for the channel.

●Alarm Recording

The recorder starts alarm recording with the preset rate and picture quality, if applicable. See ALARM RECORDING for details.

●Alarm Buzzer

The buzzer sounds when an alarm is input, if applicable.

●Alarm Log Recall and Search

The alarm events are stored in the log for later reference.

●Alarm Status Output

The active status and recovery status are output to the external devices via the terminals on the rear panel.

●Alarm Notice Mail

When connected to the Ethernet, the recorder sends an e- mail to notify the preset URL that the alarm is activated.

●Resetting Alarm

See below.

●Suspending Alarm

See below.

■Resetting Alarm

The activated alarm is reset respectively with any of the inputs: manual (all) reset, auto reset, external reset, or pressing the [REC STOP] button.

Resetting changes the status of the recorder as follows.

•The recorder stops alarm recording.

•The buzzer, if activated, stops beeping.

•The recorder outputs an alarm recovery signal from the rear panel.

•The Alarm Out signal on the rear panel is reset.

●Manual (All) Reset

Pressing the [RESET] button on the front panel will clear all operating alarms, and allow the blinking or lit ALARM indi- cator to go off.

ALARM

SUSPEND

RESET

●Auto Reset

The activated alarm event is reset when the AUTO RESET time has elapsed, or the lost video has been recovered. The ALARM indicator changes from blinking to a steady light.

●External Reset

The activated alarm event except video motion detection is reset when the recorder receives an external reset signal from the connected device via the REMOTE/ALARM con- nector on the rear panel.

The ALARM indicator changes from blinking to a steady light.

45

Page 44 Page 46
Image 45
Page 44 Page 46
Contents Operating Instructions Lightning flash with arrowhead symbol Important Safety Instructions Contents Features PrefaceTrademarks Precautions Front View 5FULL Indicator Full 4HDD Access Indicator HDD6Error indicator Error 7Stop and Setup/Escape Button Stop SETUP/ESC@7Video Out Video OUT @6Audio OutRear View Installing the Optional HDD InstallationPlaces to avoid About mountingMounting in the Rack Basic System Connections & DIP SW SettingSystem Cameras PS Data SystemNetwork System Personal computers can access the WJ-HD200 via the networkConnection with the Camera Site ALARM/REMOTE ConnectionConnection with the Monitors System Camera ConnectionAlarm Connection Time Adjusting ConnectionExternal Recording Connection Serial Port Connections RS232C ConnectionPS Data Connection Case 2 Exclusively with System Controller 10/100BASE-T Port ConnectionData Port Termination System ModePrior to Setup Setup ProceduresTurning On the Power Turning Off the PowerDisplaying WJ-HD200 Main Menu Buttons and Dials Used for SetupClosing WJ-HD200 Main Menu JogDial Counter-clockwise Decreases the parameterMenu Tree Initializing All Contents & Setup Data Initializing Setup DataInitializing Timer Recording Setup Timer REC Program 1-4 Setup Program 1- 4 SetupMain Menu WJ-HD200 Main Menu Recording Mode Setup Prog 1-4 no -4 Setup Alarm Recording Mode Setup ALM REC ModePre-alarm Recording PRE ALM REC Trigger Action Setup Trigger Action Setup Post-alarm Recording Post ALM RECCamera Recording Setup CAM REC Setup Dynamic Recording Dynamic RECExternally Specified Recording Mode EXT REC Manual Recording Setup REC SetupDisplay Setup Display Setup Clock ClockStatus Display Status Disp Time & Date Display Time & Date DispStatus Position Status Posi Time & Date Position Time & Date PosiDisk Capacity Warning HDD Full Disk Check HDD CheckRemote LED Remote LED System Setup System Setup Password Lock Setup Password Lock~ 9 a ~ Z ! % Keylock Buzzer Setup Keylock Buzz Skip Alarm Recall SetupSimultaneous Recording & Playback Disk End Mode Setup Alteration Detection SetupPlay Priority Setup Play Priority Disk End Buzzer Disk END BuzzTime Adjust Setup Time Adjusting Auto Erasing Setup Auto Erasing14, 30, 45, 60, 90, 120, 150, 180DAYS Same as Alarm Buzzer Alarm Buzz Alarm Setup Alarm SetupMonitor Mode Monitor Mode Video Motion Detection VMD SetupCommunication Setup Communication SetupSerial Setup Serial Setup Protocol ProtocolBaud Rate Baud Rate Alarm Data Alarm Data exclusive for PS DataData Bit Data BIT Parity Check Parity CheckNetwork Setup Network Setup Switcher Setup Switcher Setup Camera View Setup Camera View Spot Sequence Setup Spot SEQMulti SEQ Setup Available camera From 1 toSystem Information System InformationControlling Video Inputs & Monitors Operating ProceduresOn the Spot Monitor On the Multi-screen MonitorViewing a Single Live Sequence Viewing a Multi-screen LiveViewing Quad Live Sequence Alarm Control Function Alarm InputAlarm Output Resetting Alarm Alarm Log Recall & Search Suspending Alarm InputPressing REC Stop Button To brows through the logPower-on Recording Internal Timer RecordingRecording To search for playbackManual Recording Alarm RecordingPlayback Alarm Search PlaybackNormal Playback Skip PlaybackMulti-screen Playback Time & Date Search PlaybackPassword Verification LOCK/UNLOCK ButtonsEnabling Button Lock WJ-HD200 Preparations BrowserDisplay Direct Connection with a PC ConnectionSystem Expansion Connection with a Client PC via HubMain Page and Control Panel About Picture QualityRecorder Status Displayed Quality To Access Setup Menus WJ-HD200 SetupTimer Setup Timer Setup Main Setup MenuProgramming Program Setup Program Assignment Timer RECRecording Mode Setup Prog 1-4 no -4 SET Assignable Programs PROG1 Prog 4, OFFTrigger Action Setup Trigger Action Setup Camera Recording Setup CAM REC SetupMode Mode Manual Recording Setup REC SetupExternally Specified Recording Mode EXT REC Setup Camera Title Camera Title System Setup System Setup Skip Alarm Recall Skip Alarm Recall Password Operation Password OperationDisk End Mode Disk END Mode Time Adjusting Time AdjustingVMD Setup Video Motion Detector SetupSerial Port Setup Serial Port SetupCamera Number Setup CAM NO. Setup only for Psdata Multi Sequence Setup Multi Sequence Setup Spot Sequence Setup Spot Sequence Setup InformationCamera View Setup Camera View Setup System Log System LOG Network Configuration User Setup User SetupHost Setup Host Setup FTP Send by Periodic Timer FTP Send by Periodic Timer FTP Client Setup FTP Client SetupNetwork Video Setup Network Video Setup Mail Setup Mail SetupMain Panel Operating WJ-HD200Main Control Panel Alarm Reset button Alarm ResetCamera Selection button Camera Select Multiscreen Selection ButtonCamera Control View button Camera Control View Time & Date Search button Time&Date SearchPAN/TILT Control Left Right DownAlarm List Select Mode TroubleshootingWhen accessing via the network Phenomenon CauseSpecifications & Appendix Specifications Standard Accessories Remote Control From System Controller AppendixMenu ON/OFF Daylight SavingsTransmission Command Response CommandRS-232C Communication Protocol Command Table Alarm ControlBasic Operation Miscellaneous Control Setup ControlData Log Control Media ControlQKM InquiryHDD Maintenance When to Maintain HDD Who to Maintain HDDPower-on Procedures When Error Indicator is Lit When Full Indicator is Lit Resetting Disk EndAbbreviation Status Required Capacity Disk MenuDisk Menu Auto-removeFormatting HDD HDD Format Removing Logical Link Remove LinkNOW Formatting HDD Format →SET Done Restarting RestartHttp Download and Viewing Images Mail Contents N0103-0 V8QA6017AN

WJ-HD200 specifications

The Panasonic WJ-HD200 is a versatile and robust digital video recorder (DVR) designed primarily for high-quality surveillance applications. This device stands out for its exceptional recording capabilities, exemplifying Panasonic’s commitment to innovation in video technology.

One of the main features of the WJ-HD200 is its ability to support multiple video input channels. This DVR can accommodate up to 16 cameras simultaneously, making it an ideal choice for larger installations requiring comprehensive monitoring. Its capability to handle various camera types, including analog and IP cameras, enhances its flexibility and usability in diverse environments.

Another significant characteristic of the WJ-HD200 is its high-resolution recording. The device allows for real-time recording at a resolution of up to 720 x 480 pixels, ensuring that captured footage remains sharp and detailed. Users can adjust bit rates and frame rates according to specific surveillance needs, providing tailored video quality without sacrificing storage space or clarity.

A notable feature is the integration of advanced motion detection technology. This allows the WJ-HD200 to start recording only when motion is detected, optimizing storage usage and making it easier for users to review footage when needed. Coupled with this is the device’s intelligent search functionality, which enables quick navigation through recorded content by identifying motion events, thus saving time during investigations.

The WJ-HD200 utilizes a RAID (Redundant Array of Independent Disks) configuration, which improves data reliability and redundancy. This technology minimizes the risk of data loss due to disk failure, ensuring continuous operation and security for vital footage. Moreover, the DVR supports efficient data management with a built-in networking capability. Users can remotely access the system via a network connection, allowing for real-time monitoring and management from virtually anywhere.

Finally, the user-friendly interface of the WJ-HD200 further enhances its appeal. The system is designed for easy setup and operation, featuring a logical menu structure that simplifies navigation. With various output options, including VGA and composite outputs, users can connect the DVR to different display systems effortlessly.

In summary, the Panasonic WJ-HD200 combines high channel capacity, exceptional recording quality, advanced motion detection, reliable storage solutions, and user-friendly features. This DVR is a solid choice for anyone seeking a dependable and efficient surveillance solution.
Top Page Image Contents