Panasonic WJ-HD200 manual Password Operation Password Operation, Keylock Buzzer Keylock Buzzer

Page 61

8Password Operation (PASSWORD OPERATION)

Enter a five-digit password to protect normal operations from unauthorized access.

Available numerals: From 11111 to 88888

8Keylock Buzzer (KEYLOCK BUZZER)

The buzzer will beep or not when a locked button is pressed.

ON: Enables the buzzer to beep.

OFF: Disables the buzzer to beep.

8Skip Alarm Recall (SKIP ALARM RECALL)

Specify a skipping page number of the alarm log. The alarm log page will jump the specified pages when the JogDial is rotated.

Available skip page: From 1 to 5

8Simultaneous Recording and Playback

(SIMULTANEOUS REC&PLAY)

There may be cases where recording is essential although during playback.

ON: Allows both recording and playback at a time.

OFF: Allows exclusively recording or playback.

Note: The recording rate may be sacrificed in the following cases.

•Recording and playback/FTP access are simultane- ously carried out.

•A multi-split screen is displayed.

•VMD (video motion detection) is enabled.

•A PC accesses the live images via the network.

8Alteration Detection ALTER DETECT

You can enable or disable the recorder to add alter- ation-detection signals in the JPEG data supplied to the network. The default is OFF.

ON: Detects alterations.

OFF: Does not detect.

Note: When set to ON, the data transmission rate on the network will slow down.

8Disk End Mode DISK END MODE

STOP: Stops recording until a mode other than [STOP] is selected.

CONTINUE: Old data is automatically overwritten from the disk start.

8Disk End Buzzer DISK END BUZZER

ON: Enables the buzzer beep at the disk end (remain- ing space = 0 %).

OFF: Disables the buzzer beep.

8Play Priority PLAY PRIORITY

This setting places priority on a specific access point for playing back the image data when access collisions take place.

LOCAL: Places priority on the front panel operations.

NET PLAY: Places priority on the network access.

FTP GET: Places priority on the access to the FTP.

NONE: The latest operation has priority than others.

8Time Adjusting (TIME ADJUSTING)

The internal timer built in the WJ-HD200 is calibrated once a day via the Time Adjust In and Out terminals on the rear panel.

SLAVE: Accepts the calibration signal from the master.

MASTER: Supplies the calibration signal to the slave units at the specific hour a day.

62

Page 60 Page 62
Image 61
Page 60 Page 62
Contents Operating Instructions Lightning flash with arrowhead symbol Important Safety Instructions Contents Preface FeaturesTrademarks Precautions Front View 5FULL Indicator Full 4HDD Access Indicator HDD6Error indicator Error 7Stop and Setup/Escape Button Stop SETUP/ESC@7Video Out Video OUT @6Audio OutRear View Installing the Optional HDD InstallationPlaces to avoid About mountingMounting in the Rack Basic System Connections & DIP SW SettingSystem Cameras PS Data SystemNetwork System Personal computers can access the WJ-HD200 via the networkConnection with the Camera Site ALARM/REMOTE ConnectionConnection with the Monitors System Camera ConnectionTime Adjusting Connection Alarm ConnectionExternal Recording Connection RS232C Connection Serial Port ConnectionsPS Data Connection Case 2 Exclusively with System Controller 10/100BASE-T Port ConnectionData Port Termination System ModePrior to Setup Setup ProceduresTurning On the Power Turning Off the PowerDisplaying WJ-HD200 Main Menu Buttons and Dials Used for SetupClosing WJ-HD200 Main Menu JogDial Counter-clockwise Decreases the parameterMenu Tree Initializing Setup Data Initializing All Contents & Setup DataInitializing Program 1-4 Setup Program 1- 4 Setup Timer Recording Setup Timer RECMain Menu WJ-HD200 Main Menu Alarm Recording Mode Setup ALM REC Mode Recording Mode Setup Prog 1-4 no -4 SetupPre-alarm Recording PRE ALM REC Trigger Action Setup Trigger Action Setup Post-alarm Recording Post ALM RECCamera Recording Setup CAM REC Setup Dynamic Recording Dynamic RECExternally Specified Recording Mode EXT REC Manual Recording Setup REC SetupDisplay Setup Display Setup Clock ClockStatus Display Status Disp Time & Date Display Time & Date DispStatus Position Status Posi Time & Date Position Time & Date PosiDisk Check HDD Check Disk Capacity Warning HDD FullRemote LED Remote LED Password Lock Setup Password Lock System Setup System Setup~ 9 a ~ Z ! % Skip Alarm Recall Setup Keylock Buzzer Setup Keylock BuzzSimultaneous Recording & Playback Disk End Mode Setup Alteration Detection SetupPlay Priority Setup Play Priority Disk End Buzzer Disk END BuzzAuto Erasing Setup Auto Erasing Time Adjust Setup Time Adjusting14, 30, 45, 60, 90, 120, 150, 180DAYS Same as Alarm Buzzer Alarm Buzz Alarm Setup Alarm SetupMonitor Mode Monitor Mode Video Motion Detection VMD SetupCommunication Setup Communication SetupSerial Setup Serial Setup Protocol ProtocolBaud Rate Baud Rate Alarm Data Alarm Data exclusive for PS DataData Bit Data BIT Parity Check Parity CheckNetwork Setup Network Setup Switcher Setup Switcher Setup Camera View Setup Camera View Spot Sequence Setup Spot SEQMulti SEQ Setup Available camera From 1 toSystem Information System InformationControlling Video Inputs & Monitors Operating ProceduresOn the Spot Monitor On the Multi-screen MonitorViewing a Multi-screen Live Viewing a Single Live SequenceViewing Quad Live Sequence Alarm Input Alarm Control FunctionAlarm Output Resetting Alarm Alarm Log Recall & Search Suspending Alarm InputPressing REC Stop Button To brows through the logPower-on Recording Internal Timer RecordingRecording To search for playbackManual Recording Alarm RecordingPlayback Alarm Search PlaybackNormal Playback Skip PlaybackMulti-screen Playback Time & Date Search PlaybackLOCK/UNLOCK Buttons Password VerificationEnabling Button Lock WJ-HD200 Browser PreparationsDisplay Direct Connection with a PC ConnectionSystem Expansion Connection with a Client PC via HubAbout Picture Quality Main Page and Control PanelRecorder Status Displayed Quality To Access Setup Menus WJ-HD200 SetupTimer Setup Timer Setup Main Setup MenuProgramming Program Setup Program Assignment Timer RECRecording Mode Setup Prog 1-4 no -4 SET Assignable Programs PROG1 Prog 4, OFFCamera Recording Setup CAM REC Setup Trigger Action Setup Trigger Action SetupMode Mode REC Setup Manual Recording SetupExternally Specified Recording Mode EXT REC Setup Camera Title Camera Title System Setup System Setup Skip Alarm Recall Skip Alarm Recall Password Operation Password OperationDisk End Mode Disk END Mode Time Adjusting Time AdjustingVMD Setup Video Motion Detector SetupSerial Port Setup Serial Port SetupCamera Number Setup CAM NO. Setup only for Psdata Multi Sequence Setup Multi Sequence Setup Sequence Setup Information Spot Sequence Setup SpotCamera View Setup Camera View Setup System Log System LOG User Setup User Setup Network ConfigurationHost Setup Host Setup FTP Send by Periodic Timer FTP Send by Periodic Timer FTP Client Setup FTP Client SetupNetwork Video Setup Network Video Setup Mail Setup Mail SetupMain Panel Operating WJ-HD200Main Control Panel Alarm Reset button Alarm ResetCamera Selection button Camera Select Multiscreen Selection ButtonCamera Control View button Camera Control View Time & Date Search button Time&Date SearchPAN/TILT Control Left Right DownAlarm List Select Mode TroubleshootingWhen accessing via the network Phenomenon CauseSpecifications & Appendix Specifications Standard Accessories Appendix Remote Control From System ControllerMenu ON/OFF Daylight SavingsResponse Command Transmission CommandRS-232C Communication Protocol Alarm Control Command TableBasic Operation Miscellaneous Control Setup ControlData Log Control Media ControlQKM InquiryWhen to Maintain HDD Who to Maintain HDD HDD MaintenancePower-on Procedures When Error Indicator is Lit When Full Indicator is Lit Resetting Disk EndAbbreviation Status Required Capacity Disk MenuDisk Menu Auto-removeFormatting HDD HDD Format Removing Logical Link Remove LinkNOW Formatting HDD Format →SET Done Restarting RestartHttp Download and Viewing Images Mail Contents N0103-0 V8QA6017AN

WJ-HD200 specifications

The Panasonic WJ-HD200 is a versatile and robust digital video recorder (DVR) designed primarily for high-quality surveillance applications. This device stands out for its exceptional recording capabilities, exemplifying Panasonic’s commitment to innovation in video technology.

One of the main features of the WJ-HD200 is its ability to support multiple video input channels. This DVR can accommodate up to 16 cameras simultaneously, making it an ideal choice for larger installations requiring comprehensive monitoring. Its capability to handle various camera types, including analog and IP cameras, enhances its flexibility and usability in diverse environments.

Another significant characteristic of the WJ-HD200 is its high-resolution recording. The device allows for real-time recording at a resolution of up to 720 x 480 pixels, ensuring that captured footage remains sharp and detailed. Users can adjust bit rates and frame rates according to specific surveillance needs, providing tailored video quality without sacrificing storage space or clarity.

A notable feature is the integration of advanced motion detection technology. This allows the WJ-HD200 to start recording only when motion is detected, optimizing storage usage and making it easier for users to review footage when needed. Coupled with this is the device’s intelligent search functionality, which enables quick navigation through recorded content by identifying motion events, thus saving time during investigations.

The WJ-HD200 utilizes a RAID (Redundant Array of Independent Disks) configuration, which improves data reliability and redundancy. This technology minimizes the risk of data loss due to disk failure, ensuring continuous operation and security for vital footage. Moreover, the DVR supports efficient data management with a built-in networking capability. Users can remotely access the system via a network connection, allowing for real-time monitoring and management from virtually anywhere.

Finally, the user-friendly interface of the WJ-HD200 further enhances its appeal. The system is designed for easy setup and operation, featuring a logical menu structure that simplifies navigation. With various output options, including VGA and composite outputs, users can connect the DVR to different display systems effortlessly.

In summary, the Panasonic WJ-HD200 combines high channel capacity, exceptional recording quality, advanced motion detection, reliable storage solutions, and user-friendly features. This DVR is a solid choice for anyone seeking a dependable and efficient surveillance solution.
Top Page Image Contents