Panasonic WJ-HD200 manual LOCK/UNLOCK Buttons, Password Verification, Enabling Button Lock

LOCK/UNLOCK BUTTONS

■Password Verification

When a locked button is pressed, the key locked warning appears on the monitor for 2 seconds, then it turns to the password prompt.

PASSWORD /-----

■Enabling Button Lock

1.You need to register passwords in the SYSTEM SETUP window prior to operate your system.

2.Press the [LOCK] button for 2 seconds.

The buzzer shortly beeps twice, and the LED in the but- ton lights up. The “KEY LOCKED DONE!” message appears on the monitor.

LOCK

KEY LOCK DONE!

1.Enter your five-digit password using the [CAM SELECT] buttons (1-8). The buzzer shortly beeps once, and the entered digit changes from “–“ to “*” on the monitor.

2.The prompt window will display “ KEY UNLOCKED!” for 2 seconds, and the buzzer beeps twice if the correct password is entered.

The monitor returns to the previous display. The recorder allows access to the front panel controls if a button operation takes place within 5 minutes of pass- word entry.

3.Retry verification when password error appears on the monitor.

The recorder will exit from verification if there is no opera- tion within 30 seconds.

Note: Set PASSWORD LOCK to OFF if you do not want the recorder to revert to button lock mode when no operation takes place within 5 minutes.

51