Panasonic WJ-HD200 manual Keylock Buzzer Setup Keylock Buzz, Skip Alarm Recall Setup

Page 32

2.Select either ON or OFF with the JogDial, and press the JogDial.

The default is OFF.

ON: The buttons are password protected. The recorder enters the button lock mode if neither a button nor the JogDial is operated within a period of five min- utes.

OFF: No password protection is applied.

3.Move the cursor to ALL→ or OPERATION→ with the [D] or [C] button.

ALL: Allows both normal operations and setup opera- tions.

OPERATION: Allows only normal operations. Setup operations are not allowed.

4.Press the JogDial.

The preset password appears.

The default is “12345” for both ALL and OPERATION.

<New password setting>

5.Select a digit, rotating the JogDial.

6.Enter a number with the numeric button, and press the JogDial.

The cursor moves one digit to the right.

7.Repeat step 5 and 6 until all digits are entered.

8.Press the [SETUP/ESC] button to confirm the entered password.

Go back to step 3 if you have not yet set the OPERA- TION password.

●Keylock Buzzer Setup KEYLOCK BUZZ

SYSTEM SETUP

(1 OF 2)

PASSWORD LOCK

OFF

ALL→

*****

OPERATION→

*****

KEYLOCK BUZZ

ON

SKIP ALM-RECALL

5PAGE

SIMUL REC&PLAY

ON

ALTER DETECT

OFF

DISK END MODE

CONTINUE

DISK END BUZZ

ON

1.Move the cursor to KEYLOCK BUZZ with the [D] or [C] button.

2.Select either ON or OFF with the JogDial, and press the JogDial.

The default is ON.

ON: Buzzer beeps when unauthorized access takes place.

OFF: Buzzer does not sound.

●Skip Alarm Recall Setup

SKIP ALARM RECALL

Alarm log pages are recalled on the monitor when the JogDial is pressed for 2 seconds. When searching in the log, you may need to skip pages. The displayed page will skip the specified number forward or backward when rotat- ing the JogDial.

SYSTEM SETUP

(1 OF 2)

PASSWORD LOCK

OFF

ALL→

*****

OPERATION→

*****

KEYLOCK BUZZ

ON

SKIP ALM-RECALL

5PAGE

SIMUL REC&PLAY

ON

ALTER DETECT

OFF

DISK END MODE

CONTINUE

DISK END BUZZ

ON

1.Move the cursor to SKIP ALM RECALL with the [D] or [C] button, and press the JogDial.

2.Select the number of skip page with the JogDial, and press the JogDial.

The default is 5 pages.

Available skip page: 5, 10, 15, 20, 25 pages

●Simultaneous Recording & Playback

SIMUL REC & PLAY

This setting specifies whether to allow simultaneous play- back and recording. When the parameter is set to ON, the default of the recording rate will be changed to 15 FPS.

1.Move the cursor to SIMUL REC&PLAY with the [D] or [C] button.

2.Select on or off with the JogDial, and press the Jogdial. The default is ON.

ON: Allows simultaneous recording and playback including remote-access playback and FTP access. The default recording rate is 15 FPS, and as the highest rate is 30 FPS.

OFF: Places priority on recording triggered by pressing the REC button or by an alarm input. Playback including remote-access playback and FTP access will be interrupted if recording starts. The default recording rate is 15 FPS, and as the highest rate is 30 FPS.

Notes:

•A 30 FPS recording will decrease the rate to 15 FPS when playback, remote-access playback, or FTP access is carried out simultaneously with recording.

32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Operating Instructions Lightning flash with arrowhead symbol Important Safety Instructions Contents Trademarks FeaturesPreface Precautions Front View 4HDD Access Indicator HDD 5FULL Indicator Full6Error indicator Error 7Stop and Setup/Escape Button Stop SETUP/ESC@6Audio Out @7Video Out Video OUTRear View Installation Installing the Optional HDDPlaces to avoid About mountingMounting in the Rack Connections & DIP SW Setting Basic SystemPS Data System System CamerasPersonal computers can access the WJ-HD200 via the network Network SystemALARM/REMOTE Connection Connection with the Camera SiteConnection with the Monitors System Camera ConnectionExternal Recording Connection Alarm ConnectionTime Adjusting Connection PS Data Connection Serial Port ConnectionsRS232C Connection 10/100BASE-T Port Connection Case 2 Exclusively with System ControllerSystem Mode Data Port TerminationSetup Procedures Prior to SetupTurning On the Power Turning Off the PowerButtons and Dials Used for Setup Displaying WJ-HD200 Main MenuClosing WJ-HD200 Main Menu JogDial Counter-clockwise Decreases the parameterMenu Tree Initializing Initializing All Contents & Setup DataInitializing Setup Data Main Menu WJ-HD200 Main Menu Timer Recording Setup Timer RECProgram 1-4 Setup Program 1- 4 Setup Pre-alarm Recording PRE ALM REC Recording Mode Setup Prog 1-4 no -4 SetupAlarm Recording Mode Setup ALM REC Mode Post-alarm Recording Post ALM REC Trigger Action Setup Trigger Action SetupCamera Recording Setup CAM REC Setup Dynamic Recording Dynamic RECManual Recording Setup REC Setup Externally Specified Recording Mode EXT RECDisplay Setup Display Setup Clock ClockTime & Date Display Time & Date Disp Status Display Status DispStatus Position Status Posi Time & Date Position Time & Date PosiRemote LED Remote LED Disk Capacity Warning HDD FullDisk Check HDD Check ~ 9 a ~ Z ! % System Setup System SetupPassword Lock Setup Password Lock Simultaneous Recording & Playback Keylock Buzzer Setup Keylock BuzzSkip Alarm Recall Setup Alteration Detection Setup Disk End Mode SetupPlay Priority Setup Play Priority Disk End Buzzer Disk END Buzz14, 30, 45, 60, 90, 120, 150, 180DAYS Same as Time Adjust Setup Time AdjustingAuto Erasing Setup Auto Erasing Alarm Setup Alarm Setup Alarm Buzzer Alarm BuzzMonitor Mode Monitor Mode Video Motion Detection VMD SetupCommunication Setup Communication SetupSerial Setup Serial Setup Protocol ProtocolAlarm Data Alarm Data exclusive for PS Data Baud Rate Baud RateData Bit Data BIT Parity Check Parity CheckNetwork Setup Network Setup Switcher Setup Switcher Setup Spot Sequence Setup Spot SEQ Camera View Setup Camera ViewMulti SEQ Setup Available camera From 1 toSystem Information System InformationOperating Procedures Controlling Video Inputs & MonitorsOn the Spot Monitor On the Multi-screen MonitorViewing Quad Live Sequence Viewing a Single Live SequenceViewing a Multi-screen Live Alarm Output Alarm Control FunctionAlarm Input Resetting Alarm Suspending Alarm Input Alarm Log Recall & SearchPressing REC Stop Button To brows through the logInternal Timer Recording Power-on RecordingRecording To search for playbackAlarm Recording Manual RecordingAlarm Search Playback PlaybackNormal Playback Skip PlaybackTime & Date Search Playback Multi-screen PlaybackEnabling Button Lock Password VerificationLOCK/UNLOCK Buttons WJ-HD200 Display PreparationsBrowser Connection Direct Connection with a PCSystem Expansion Connection with a Client PC via HubRecorder Status Displayed Quality Main Page and Control PanelAbout Picture Quality WJ-HD200 Setup To Access Setup MenusTimer Setup Timer Setup Main Setup MenuProgram Assignment Timer REC Programming Program SetupRecording Mode Setup Prog 1-4 no -4 SET Assignable Programs PROG1 Prog 4, OFFMode Mode Trigger Action Setup Trigger Action SetupCamera Recording Setup CAM REC Setup Externally Specified Recording Mode EXT REC Setup Manual Recording SetupREC Setup Camera Title Camera Title System Setup System Setup Password Operation Password Operation Skip Alarm Recall Skip Alarm RecallDisk End Mode Disk END Mode Time Adjusting Time AdjustingVideo Motion Detector Setup VMD SetupSerial Port Setup Serial Port SetupCamera Number Setup CAM NO. Setup only for Psdata Multi Sequence Setup Multi Sequence Setup Camera View Setup Camera View Setup Spot Sequence Setup SpotSequence Setup Information System Log System LOG Host Setup Host Setup Network ConfigurationUser Setup User Setup FTP Client Setup FTP Client Setup FTP Send by Periodic Timer FTP Send by Periodic TimerMail Setup Mail Setup Network Video Setup Network Video SetupOperating WJ-HD200 Main PanelAlarm Reset button Alarm Reset Main Control PanelCamera Selection button Camera Select Multiscreen Selection ButtonTime & Date Search button Time&Date Search Camera Control View button Camera Control ViewPAN/TILT Control Left Right DownAlarm List Troubleshooting Select ModeWhen accessing via the network Phenomenon CauseSpecifications & Appendix Specifications Standard Accessories Menu Remote Control From System ControllerAppendix Daylight Savings ON/OFFRS-232C Communication Protocol Transmission CommandResponse Command Basic Operation Command TableAlarm Control Setup Control Miscellaneous ControlData Log Control Media ControlInquiry QKMPower-on Procedures HDD MaintenanceWhen to Maintain HDD Who to Maintain HDD When Full Indicator is Lit Resetting Disk End When Error Indicator is LitDisk Menu Abbreviation Status Required CapacityDisk Menu Auto-removeRemoving Logical Link Remove Link Formatting HDD HDD FormatRestarting Restart NOW Formatting HDD Format →SET DoneHttp Download and Viewing Images Mail Contents N0103-0 V8QA6017AN

WJ-HD200 specifications

The Panasonic WJ-HD200 is a versatile and robust digital video recorder (DVR) designed primarily for high-quality surveillance applications. This device stands out for its exceptional recording capabilities, exemplifying Panasonic’s commitment to innovation in video technology.

One of the main features of the WJ-HD200 is its ability to support multiple video input channels. This DVR can accommodate up to 16 cameras simultaneously, making it an ideal choice for larger installations requiring comprehensive monitoring. Its capability to handle various camera types, including analog and IP cameras, enhances its flexibility and usability in diverse environments.

Another significant characteristic of the WJ-HD200 is its high-resolution recording. The device allows for real-time recording at a resolution of up to 720 x 480 pixels, ensuring that captured footage remains sharp and detailed. Users can adjust bit rates and frame rates according to specific surveillance needs, providing tailored video quality without sacrificing storage space or clarity.

A notable feature is the integration of advanced motion detection technology. This allows the WJ-HD200 to start recording only when motion is detected, optimizing storage usage and making it easier for users to review footage when needed. Coupled with this is the device’s intelligent search functionality, which enables quick navigation through recorded content by identifying motion events, thus saving time during investigations.

The WJ-HD200 utilizes a RAID (Redundant Array of Independent Disks) configuration, which improves data reliability and redundancy. This technology minimizes the risk of data loss due to disk failure, ensuring continuous operation and security for vital footage. Moreover, the DVR supports efficient data management with a built-in networking capability. Users can remotely access the system via a network connection, allowing for real-time monitoring and management from virtually anywhere.

Finally, the user-friendly interface of the WJ-HD200 further enhances its appeal. The system is designed for easy setup and operation, featuring a logical menu structure that simplifies navigation. With various output options, including VGA and composite outputs, users can connect the DVR to different display systems effortlessly.

In summary, the Panasonic WJ-HD200 combines high channel capacity, exceptional recording quality, advanced motion detection, reliable storage solutions, and user-friendly features. This DVR is a solid choice for anyone seeking a dependable and efficient surveillance solution.
Top Page Image Contents