Panasonic WJ-HD200 manual Disk Menu, Abbreviation Status Required Capacity, Auto-remove

Page 87

DISK MENU

8Disk Menu

The menu appears if the hard disk error is found during power-up.

The buzzer beeps every 5 seconds, and ERROR indi- cator turns off.

Press buttons other than [STOP] to mute buzzer beep.

Hard disk status and required operation are shown in the table.

DISK MENU

NO.1:117.95GB

NO.2:117.95GB

REMOVE LINK SETHDD FORMAT SET

RESTART SET

Hard Disk Status

Operation

Abbreviation

Status

Required

Note

Capacity

Normal status

 

 

 

 

 

 

 

ERR

Writing error

Format, remove link ,or replace HDD

Abbreviation SYS appears in SYSTEM

 

 

if erred even after formatting.

LOG when indicating a writing error.

 

 

 

 

 

 

LOST or * status was left for

Same as above.

 

 

 

five minutes.

 

 

 

 

 

 

 

 

*

Awaiting format

Format

Replaced HDD has been not format-

 

 

 

ted yet.

 

 

 

 

 

 

HDD error

Replace HDD if erred even after

Replaced HDD malfunctions.

 

 

formatting.

 

 

 

 

 

 

 

 

HDD logically removed

Remove HDD to add a new one,

Appears only when manually opening

 

 

or reconnect.

DISK MENU.

 

 

 

 

 

LOST

HDD physically removed

Remove link, or add a new HDD.

 

 

 

 

 

 

 

ADD

HDD added, and awaiting

Format

 

 

 

format

 

 

 

 

 

 

 

Previous time and this time,

REMOVE LINK command has been

 

HDD logically removed

 

previously carried out .

 

 

 

 

 

You can implement necessary operation from among them.

REMOVE LINK: Removes logically the HDD link.

HDD FORMAT: Formats the HDD.

RESTART: Closes the menu, and returns to normal operation.

The menu can also be displayed manually when you need to format HDD, or to remove the logical link.

1.Turn off the power of the recorder once, and turn it on again.

The multi-screen monitor displays a message “SYSTEM CHECK DONE! TO OPEN DISK MENU, PUSH STOP KEY”.

2.Press the [STOP] button. The DISK MENU opens.

3.Select any of REMOVE LINK, HDD FORMAT, or RESTART.

Auto-remove

When no button is pressed for 5 minutes after opening the DISK MENU, The recorder will logically remove the disk that meets any conditions below.

An HDD has been categorized in “ * ”, “LOST”, or “ERR”.

Restart was repeated 3 times due to writing error.

88

Image 87
Contents Operating Instructions Lightning flash with arrowhead symbol Important Safety Instructions Contents Features PrefaceTrademarks Precautions Front View 7Stop and Setup/Escape Button Stop SETUP/ESC 4HDD Access Indicator HDD5FULL Indicator Full 6Error indicator Error@7Video Out Video OUT @6Audio OutRear View About mounting InstallationInstalling the Optional HDD Places to avoidMounting in the Rack Basic System Connections & DIP SW SettingSystem Cameras PS Data SystemNetwork System Personal computers can access the WJ-HD200 via the networkSystem Camera Connection ALARM/REMOTE ConnectionConnection with the Camera Site Connection with the MonitorsAlarm Connection Time Adjusting ConnectionExternal Recording Connection Serial Port Connections RS232C ConnectionPS Data Connection Case 2 Exclusively with System Controller 10/100BASE-T Port ConnectionData Port Termination System ModeTurning Off the Power Setup ProceduresPrior to Setup Turning On the PowerJogDial Counter-clockwise Decreases the parameter Buttons and Dials Used for SetupDisplaying WJ-HD200 Main Menu Closing WJ-HD200 Main MenuMenu Tree Initializing All Contents & Setup Data Initializing Setup DataInitializing Timer Recording Setup Timer REC Program 1-4 Setup Program 1- 4 SetupMain Menu WJ-HD200 Main Menu Recording Mode Setup Prog 1-4 no -4 Setup Alarm Recording Mode Setup ALM REC ModePre-alarm Recording PRE ALM REC Dynamic Recording Dynamic REC Post-alarm Recording Post ALM RECTrigger Action Setup Trigger Action Setup Camera Recording Setup CAM REC SetupClock Clock Manual Recording Setup REC SetupExternally Specified Recording Mode EXT REC Display Setup Display SetupTime & Date Position Time & Date Posi Time & Date Display Time & Date DispStatus Display Status Disp Status Position Status PosiDisk Capacity Warning HDD Full Disk Check HDD CheckRemote LED Remote LED System Setup System Setup Password Lock Setup Password Lock~ 9 a ~ Z ! % Keylock Buzzer Setup Keylock Buzz Skip Alarm Recall SetupSimultaneous Recording & Playback Disk End Buzzer Disk END Buzz Alteration Detection SetupDisk End Mode Setup Play Priority Setup Play PriorityTime Adjust Setup Time Adjusting Auto Erasing Setup Auto Erasing14, 30, 45, 60, 90, 120, 150, 180DAYS Same as Video Motion Detection VMD Setup Alarm Setup Alarm SetupAlarm Buzzer Alarm Buzz Monitor Mode Monitor ModeProtocol Protocol Communication SetupCommunication Setup Serial Setup Serial SetupParity Check Parity Check Alarm Data Alarm Data exclusive for PS DataBaud Rate Baud Rate Data Bit Data BITNetwork Setup Network Setup Switcher Setup Switcher Setup Available camera From 1 to Spot Sequence Setup Spot SEQCamera View Setup Camera View Multi SEQ SetupSystem Information System InformationOn the Multi-screen Monitor Operating ProceduresControlling Video Inputs & Monitors On the Spot MonitorViewing a Single Live Sequence Viewing a Multi-screen LiveViewing Quad Live Sequence Alarm Control Function Alarm InputAlarm Output Resetting Alarm To brows through the log Suspending Alarm InputAlarm Log Recall & Search Pressing REC Stop ButtonTo search for playback Internal Timer RecordingPower-on Recording RecordingManual Recording Alarm RecordingSkip Playback Alarm Search PlaybackPlayback Normal PlaybackMulti-screen Playback Time & Date Search PlaybackPassword Verification LOCK/UNLOCK ButtonsEnabling Button Lock WJ-HD200 Preparations BrowserDisplay Connection with a Client PC via Hub ConnectionDirect Connection with a PC System ExpansionMain Page and Control Panel About Picture QualityRecorder Status Displayed Quality Main Setup Menu WJ-HD200 SetupTo Access Setup Menus Timer Setup Timer SetupAssignable Programs PROG1 Prog 4, OFF Program Assignment Timer RECProgramming Program Setup Recording Mode Setup Prog 1-4 no -4 SETTrigger Action Setup Trigger Action Setup Camera Recording Setup CAM REC SetupMode Mode Manual Recording Setup REC SetupExternally Specified Recording Mode EXT REC Setup Camera Title Camera Title System Setup System Setup Time Adjusting Time Adjusting Password Operation Password OperationSkip Alarm Recall Skip Alarm Recall Disk End Mode Disk END ModeVMD Setup Video Motion Detector SetupSerial Port Setup Serial Port SetupCamera Number Setup CAM NO. Setup only for Psdata Multi Sequence Setup Multi Sequence Setup Spot Sequence Setup Spot Sequence Setup InformationCamera View Setup Camera View Setup System Log System LOG Network Configuration User Setup User SetupHost Setup Host Setup FTP Send by Periodic Timer FTP Send by Periodic Timer FTP Client Setup FTP Client SetupNetwork Video Setup Network Video Setup Mail Setup Mail SetupMain Panel Operating WJ-HD200Multiscreen Selection Button Alarm Reset button Alarm ResetMain Control Panel Camera Selection button Camera SelectLeft Right Down Time & Date Search button Time&Date SearchCamera Control View button Camera Control View PAN/TILT ControlAlarm List Phenomenon Cause TroubleshootingSelect Mode When accessing via the networkSpecifications & Appendix Specifications Standard Accessories Remote Control From System Controller AppendixMenu ON/OFF Daylight SavingsTransmission Command Response CommandRS-232C Communication Protocol Command Table Alarm ControlBasic Operation Media Control Setup ControlMiscellaneous Control Data Log ControlQKM InquiryHDD Maintenance When to Maintain HDD Who to Maintain HDDPower-on Procedures When Error Indicator is Lit When Full Indicator is Lit Resetting Disk EndAuto-remove Disk MenuAbbreviation Status Required Capacity Disk MenuFormatting HDD HDD Format Removing Logical Link Remove LinkNOW Formatting HDD Format →SET Done Restarting RestartHttp Download and Viewing Images Mail Contents N0103-0 V8QA6017AN

WJ-HD200 specifications

The Panasonic WJ-HD200 is a versatile and robust digital video recorder (DVR) designed primarily for high-quality surveillance applications. This device stands out for its exceptional recording capabilities, exemplifying Panasonic’s commitment to innovation in video technology.

One of the main features of the WJ-HD200 is its ability to support multiple video input channels. This DVR can accommodate up to 16 cameras simultaneously, making it an ideal choice for larger installations requiring comprehensive monitoring. Its capability to handle various camera types, including analog and IP cameras, enhances its flexibility and usability in diverse environments.

Another significant characteristic of the WJ-HD200 is its high-resolution recording. The device allows for real-time recording at a resolution of up to 720 x 480 pixels, ensuring that captured footage remains sharp and detailed. Users can adjust bit rates and frame rates according to specific surveillance needs, providing tailored video quality without sacrificing storage space or clarity.

A notable feature is the integration of advanced motion detection technology. This allows the WJ-HD200 to start recording only when motion is detected, optimizing storage usage and making it easier for users to review footage when needed. Coupled with this is the device’s intelligent search functionality, which enables quick navigation through recorded content by identifying motion events, thus saving time during investigations.

The WJ-HD200 utilizes a RAID (Redundant Array of Independent Disks) configuration, which improves data reliability and redundancy. This technology minimizes the risk of data loss due to disk failure, ensuring continuous operation and security for vital footage. Moreover, the DVR supports efficient data management with a built-in networking capability. Users can remotely access the system via a network connection, allowing for real-time monitoring and management from virtually anywhere.

Finally, the user-friendly interface of the WJ-HD200 further enhances its appeal. The system is designed for easy setup and operation, featuring a logical menu structure that simplifies navigation. With various output options, including VGA and composite outputs, users can connect the DVR to different display systems effortlessly.

In summary, the Panasonic WJ-HD200 combines high channel capacity, exceptional recording quality, advanced motion detection, reliable storage solutions, and user-friendly features. This DVR is a solid choice for anyone seeking a dependable and efficient surveillance solution.