Panasonic WJ-HD200 When Full Indicator is Lit Resetting Disk End, When Error Indicator is Lit

Page 86

●When Full Indicator is Lit (Resetting Disk End)

8FULL Indicator

The FULL indicator will light up when STOP is set to DISK END MODE, provided that the disk space nears the end.

To reset it, obey the following.

8DISK END Setup

1.Hold down the [STOP] button for 2 seconds to open the

MAIN MENU.

WJ-HD200 MAIN MENU

TIMER

OFF

O

 

REC SETUPO

 

EXT REC SETUPO

 

DISPLAY SETUPO

SYSTEM SETUPO

ALARM SETUPO

COMMUNICATION SETUPO

SWITCHER SETUPO

SYSTEM INFORMATIONO

2.Select SYSTEM SETUP, and press the JogDial to open the SYSTEM SETUP menu.

SYSTEM SETUP

(1 OF 2)

PASSWORD LOCK

OFF

ALL→

*****

OPERATION→

*****

KEYLOCK BUZZ

OFF

SKIP ALM-RECALL

5PAGE

SIMUL REC&PLAY

ON

ALTER DETECT

OFF

DISK END MODE

CONTINUE

DISK END BUZZ

ON

3.Move the cursor to DISK END MODE, and rotate the JogDial to select CONTINUE. Then press the JogDial.

STOP: Stops recording at the disk end.

CONTINUE: Overwrites from the start of the disk.

4.Press the [STOP] button to return to the MAIN MENU.

5.Hold down the [STOP] button for 2 seconds to return to normal operations.

The recorder starts operating in the continue mode for disk end.

If you wish the recorder to revert to STOP for DISK END MODE, repeat above steps 1 through 5, except select- ing STOP in the step 3.

●When Error Indicator is Lit

Refer to your dealer for servicing when this happens.

8HDD Check

The recorder checks the hard disk when the recorder is turned on, or when the HDD CHECK time specified in the menu setup comes during operation.

The recorder warns you of an error as follows, if detect- ed.

Error indicator blinks.

Warning Out terminal on the rear panel turns active.

“NO DISK” will appear when there is no disk installed in the recorder.

NO DISK

When this happens, turn off the power. New disk(s) should be installed on the recorder, referring to INSTALLATION.

8When Error Detected

1.Turn off the recorder, and turn it on again. It will perform as follows.

DISK MENU is displayed. Error indicator blinks.

Buzzer beeps every 5 seconds.

2.Press any buttons other than [STOP] to stop the indica- tor blinking and buzzer beep.

3.See DISK MENU on the next page for further opera- tions.

87

Page 85 Page 87
Image 86
Page 85 Page 87
Contents Operating Instructions Lightning flash with arrowhead symbol Important Safety Instructions Contents Trademarks FeaturesPreface Precautions Front View 6Error indicator Error 4HDD Access Indicator HDD5FULL Indicator Full 7Stop and Setup/Escape Button Stop SETUP/ESC@6Audio Out @7Video Out Video OUTRear View Places to avoid InstallationInstalling the Optional HDD About mountingMounting in the Rack Connections & DIP SW Setting Basic SystemPS Data System System CamerasPersonal computers can access the WJ-HD200 via the network Network SystemConnection with the Monitors ALARM/REMOTE ConnectionConnection with the Camera Site System Camera ConnectionExternal Recording Connection Alarm ConnectionTime Adjusting Connection PS Data Connection Serial Port ConnectionsRS232C Connection 10/100BASE-T Port Connection Case 2 Exclusively with System ControllerSystem Mode Data Port TerminationTurning On the Power Setup ProceduresPrior to Setup Turning Off the PowerClosing WJ-HD200 Main Menu Buttons and Dials Used for SetupDisplaying WJ-HD200 Main Menu JogDial Counter-clockwise Decreases the parameterMenu Tree Initializing Initializing All Contents & Setup DataInitializing Setup Data Main Menu WJ-HD200 Main Menu Timer Recording Setup Timer RECProgram 1-4 Setup Program 1- 4 Setup Pre-alarm Recording PRE ALM REC Recording Mode Setup Prog 1-4 no -4 SetupAlarm Recording Mode Setup ALM REC Mode Camera Recording Setup CAM REC Setup Post-alarm Recording Post ALM RECTrigger Action Setup Trigger Action Setup Dynamic Recording Dynamic RECDisplay Setup Display Setup Manual Recording Setup REC SetupExternally Specified Recording Mode EXT REC Clock ClockStatus Position Status Posi Time & Date Display Time & Date DispStatus Display Status Disp Time & Date Position Time & Date PosiRemote LED Remote LED Disk Capacity Warning HDD FullDisk Check HDD Check ~ 9 a ~ Z ! % System Setup System SetupPassword Lock Setup Password Lock Simultaneous Recording & Playback Keylock Buzzer Setup Keylock BuzzSkip Alarm Recall Setup Play Priority Setup Play Priority Alteration Detection SetupDisk End Mode Setup Disk End Buzzer Disk END Buzz14, 30, 45, 60, 90, 120, 150, 180DAYS Same as Time Adjust Setup Time AdjustingAuto Erasing Setup Auto Erasing Monitor Mode Monitor Mode Alarm Setup Alarm SetupAlarm Buzzer Alarm Buzz Video Motion Detection VMD SetupSerial Setup Serial Setup Communication SetupCommunication Setup Protocol ProtocolData Bit Data BIT Alarm Data Alarm Data exclusive for PS DataBaud Rate Baud Rate Parity Check Parity CheckNetwork Setup Network Setup Switcher Setup Switcher Setup Multi SEQ Setup Spot Sequence Setup Spot SEQCamera View Setup Camera View Available camera From 1 toSystem Information System InformationOn the Spot Monitor Operating ProceduresControlling Video Inputs & Monitors On the Multi-screen MonitorViewing Quad Live Sequence Viewing a Single Live SequenceViewing a Multi-screen Live Alarm Output Alarm Control FunctionAlarm Input Resetting Alarm Pressing REC Stop Button Suspending Alarm InputAlarm Log Recall & Search To brows through the logRecording Internal Timer RecordingPower-on Recording To search for playbackAlarm Recording Manual RecordingNormal Playback Alarm Search PlaybackPlayback Skip PlaybackTime & Date Search Playback Multi-screen PlaybackEnabling Button Lock Password VerificationLOCK/UNLOCK Buttons WJ-HD200 Display PreparationsBrowser System Expansion ConnectionDirect Connection with a PC Connection with a Client PC via HubRecorder Status Displayed Quality Main Page and Control PanelAbout Picture Quality Timer Setup Timer Setup WJ-HD200 SetupTo Access Setup Menus Main Setup MenuRecording Mode Setup Prog 1-4 no -4 SET Program Assignment Timer RECProgramming Program Setup Assignable Programs PROG1 Prog 4, OFFMode Mode Trigger Action Setup Trigger Action SetupCamera Recording Setup CAM REC Setup Externally Specified Recording Mode EXT REC Setup Manual Recording SetupREC Setup Camera Title Camera Title System Setup System Setup Disk End Mode Disk END Mode Password Operation Password OperationSkip Alarm Recall Skip Alarm Recall Time Adjusting Time AdjustingVideo Motion Detector Setup VMD SetupSerial Port Setup Serial Port SetupCamera Number Setup CAM NO. Setup only for Psdata Multi Sequence Setup Multi Sequence Setup Camera View Setup Camera View Setup Spot Sequence Setup SpotSequence Setup Information System Log System LOG Host Setup Host Setup Network ConfigurationUser Setup User Setup FTP Client Setup FTP Client Setup FTP Send by Periodic Timer FTP Send by Periodic TimerMail Setup Mail Setup Network Video Setup Network Video SetupOperating WJ-HD200 Main PanelCamera Selection button Camera Select Alarm Reset button Alarm ResetMain Control Panel Multiscreen Selection ButtonPAN/TILT Control Time & Date Search button Time&Date SearchCamera Control View button Camera Control View Left Right DownAlarm List When accessing via the network TroubleshootingSelect Mode Phenomenon CauseSpecifications & Appendix Specifications Standard Accessories Menu Remote Control From System ControllerAppendix Daylight Savings ON/OFFRS-232C Communication Protocol Transmission CommandResponse Command Basic Operation Command TableAlarm Control Data Log Control Setup ControlMiscellaneous Control Media ControlInquiry QKMPower-on Procedures HDD MaintenanceWhen to Maintain HDD Who to Maintain HDD When Full Indicator is Lit Resetting Disk End When Error Indicator is LitDisk Menu Disk MenuAbbreviation Status Required Capacity Auto-removeRemoving Logical Link Remove Link Formatting HDD HDD FormatRestarting Restart NOW Formatting HDD Format →SET DoneHttp Download and Viewing Images Mail Contents N0103-0 V8QA6017AN

WJ-HD200 specifications

The Panasonic WJ-HD200 is a versatile and robust digital video recorder (DVR) designed primarily for high-quality surveillance applications. This device stands out for its exceptional recording capabilities, exemplifying Panasonic’s commitment to innovation in video technology.

One of the main features of the WJ-HD200 is its ability to support multiple video input channels. This DVR can accommodate up to 16 cameras simultaneously, making it an ideal choice for larger installations requiring comprehensive monitoring. Its capability to handle various camera types, including analog and IP cameras, enhances its flexibility and usability in diverse environments.

Another significant characteristic of the WJ-HD200 is its high-resolution recording. The device allows for real-time recording at a resolution of up to 720 x 480 pixels, ensuring that captured footage remains sharp and detailed. Users can adjust bit rates and frame rates according to specific surveillance needs, providing tailored video quality without sacrificing storage space or clarity.

A notable feature is the integration of advanced motion detection technology. This allows the WJ-HD200 to start recording only when motion is detected, optimizing storage usage and making it easier for users to review footage when needed. Coupled with this is the device’s intelligent search functionality, which enables quick navigation through recorded content by identifying motion events, thus saving time during investigations.

The WJ-HD200 utilizes a RAID (Redundant Array of Independent Disks) configuration, which improves data reliability and redundancy. This technology minimizes the risk of data loss due to disk failure, ensuring continuous operation and security for vital footage. Moreover, the DVR supports efficient data management with a built-in networking capability. Users can remotely access the system via a network connection, allowing for real-time monitoring and management from virtually anywhere.

Finally, the user-friendly interface of the WJ-HD200 further enhances its appeal. The system is designed for easy setup and operation, featuring a logical menu structure that simplifies navigation. With various output options, including VGA and composite outputs, users can connect the DVR to different display systems effortlessly.

In summary, the Panasonic WJ-HD200 combines high channel capacity, exceptional recording quality, advanced motion detection, reliable storage solutions, and user-friendly features. This DVR is a solid choice for anyone seeking a dependable and efficient surveillance solution.
Top Page Image Contents