Panasonic WJ-HD200 manual Alarm Setup Alarm Setup, Alarm Buzzer Alarm Buzz, Video Loss Video Loss

Page 35

Alarm Setup ALARM SETUP

The digital disk recorder accepts alarm signals supplied from connected devices such as sensors or camera site equipment. The recorder by itself also generates an alarm signal when the preset motion detection is activated. Any alarm signal starts recording with the preset recording mode, field rate, and picture quality specified in the REC MODE menu described earlier. Alarm recording stops when the preset time has elapsed, the alarm [RESET] but- ton on the front panel is pressed, or the ALARM RESET IN is supplied from the connected device. The recorder out- puts an alarm recovery signal from the rear panel.

 

ALARM SETUP

ALARM

BUZZ

ON

VIDEO

LOSS

ON

MONITOR MODE

SPOT

VMD SETUPO

 

Alarm Buzzer ALARM BUZZ

Buzzer beeping is enabled or disabled when an alarm operates.

1.Move the cursor to ALARM BUZZ with the [D] or [C] button.

2.Rotate the JogDial to select ON or OFF. The default is ON.

ON: Buzzer beeps while alarm is active.

OFF: Buzzer does not beep.

Video Loss VIDEO LOSS

Video loss detection is enabled or disabled.

1.Move the cursor to VIDEO LOSS with the [D] or [C] button.

2.Rotate the JogDial to select ON or OFF. The default is ON.

ON: Enables the recorder to detect video loss.

OFF: Ignores video loss.

Monitor Mode MONITOR MODE

This setting specifies whether to allow the displayed picture to change to the alarm activated channel when an alarm operates.

1.Move the cursor to MONITOR MODE with the [D] or [C] button.

2.Select the parameter with the JogDial, and press the Jogdial.

The default is SPOT.

SPOT: Switches to the picture of the channel that the alarm operates.

OFF: Retains the previous display mode.

Video Motion Detection VMD SETUP

A VMD or Video Motion Detector senses changes in the video signals within a preset area and supplies alarm out- put. When a change is detected, the recorder starts record- ing. The detection sensitivity and area are selected on this menu.

1.Move the cursor to VMD SETUPO with the [D] or [C] button, and press the JogDial. The VMD SETUP window opens.

 

VMD SETUP

CAM

SENS

1

OFF

2

LOWO

3

MIDO

4

HIGHO

5

OFF

6

OFF

7

OFF

8

OFF

2.Move the cursor to the desired line.

3.Rotate the JogDial to select the desired parameter, and press the JogDial.

The default is OFF.

LOW: Low sensitivity.

MID: Medium sensitivity.

HIGH: High sensitivity.

OFF: Motion detection is disabled.

The area setup window appears with an asterisk when other than OFF is selected. The asterisk represents the upper-left or bottom-right of the detection area. The division lines are not actually displayed on the monitor.

35

Image 35
Contents Operating Instructions Lightning flash with arrowhead symbol Important Safety Instructions Contents Trademarks FeaturesPreface Precautions Front View 7Stop and Setup/Escape Button Stop SETUP/ESC 4HDD Access Indicator HDD5FULL Indicator Full 6Error indicator Error@7Video Out Video OUT @6Audio OutRear View About mounting InstallationInstalling the Optional HDD Places to avoidMounting in the Rack Basic System Connections & DIP SW SettingSystem Cameras PS Data SystemNetwork System Personal computers can access the WJ-HD200 via the networkSystem Camera Connection ALARM/REMOTE ConnectionConnection with the Camera Site Connection with the MonitorsExternal Recording Connection Alarm ConnectionTime Adjusting Connection PS Data Connection Serial Port ConnectionsRS232C Connection Case 2 Exclusively with System Controller 10/100BASE-T Port ConnectionData Port Termination System ModeTurning Off the Power Setup ProceduresPrior to Setup Turning On the PowerJogDial Counter-clockwise Decreases the parameter Buttons and Dials Used for SetupDisplaying WJ-HD200 Main Menu Closing WJ-HD200 Main MenuMenu Tree Initializing Initializing All Contents & Setup DataInitializing Setup Data Main Menu WJ-HD200 Main Menu Timer Recording Setup Timer RECProgram 1-4 Setup Program 1- 4 Setup Pre-alarm Recording PRE ALM REC Recording Mode Setup Prog 1-4 no -4 SetupAlarm Recording Mode Setup ALM REC Mode Dynamic Recording Dynamic REC Post-alarm Recording Post ALM RECTrigger Action Setup Trigger Action Setup Camera Recording Setup CAM REC SetupClock Clock Manual Recording Setup REC SetupExternally Specified Recording Mode EXT REC Display Setup Display SetupTime & Date Position Time & Date Posi Time & Date Display Time & Date DispStatus Display Status Disp Status Position Status PosiRemote LED Remote LED Disk Capacity Warning HDD FullDisk Check HDD Check ~ 9 a ~ Z ! % System Setup System SetupPassword Lock Setup Password Lock Simultaneous Recording & Playback Keylock Buzzer Setup Keylock BuzzSkip Alarm Recall Setup Disk End Buzzer Disk END Buzz Alteration Detection SetupDisk End Mode Setup Play Priority Setup Play Priority14, 30, 45, 60, 90, 120, 150, 180DAYS Same as Time Adjust Setup Time AdjustingAuto Erasing Setup Auto Erasing Video Motion Detection VMD Setup Alarm Setup Alarm SetupAlarm Buzzer Alarm Buzz Monitor Mode Monitor ModeProtocol Protocol Communication SetupCommunication Setup Serial Setup Serial SetupParity Check Parity Check Alarm Data Alarm Data exclusive for PS DataBaud Rate Baud Rate Data Bit Data BITNetwork Setup Network Setup Switcher Setup Switcher Setup Available camera From 1 to Spot Sequence Setup Spot SEQCamera View Setup Camera View Multi SEQ SetupSystem Information System InformationOn the Multi-screen Monitor Operating ProceduresControlling Video Inputs & Monitors On the Spot MonitorViewing Quad Live Sequence Viewing a Single Live SequenceViewing a Multi-screen Live Alarm Output Alarm Control FunctionAlarm Input Resetting Alarm To brows through the log Suspending Alarm InputAlarm Log Recall & Search Pressing REC Stop ButtonTo search for playback Internal Timer RecordingPower-on Recording RecordingManual Recording Alarm RecordingSkip Playback Alarm Search PlaybackPlayback Normal PlaybackMulti-screen Playback Time & Date Search PlaybackEnabling Button Lock Password VerificationLOCK/UNLOCK Buttons WJ-HD200 Display PreparationsBrowser Connection with a Client PC via Hub ConnectionDirect Connection with a PC System ExpansionRecorder Status Displayed Quality Main Page and Control PanelAbout Picture Quality Main Setup Menu WJ-HD200 SetupTo Access Setup Menus Timer Setup Timer SetupAssignable Programs PROG1 Prog 4, OFF Program Assignment Timer RECProgramming Program Setup Recording Mode Setup Prog 1-4 no -4 SETMode Mode Trigger Action Setup Trigger Action SetupCamera Recording Setup CAM REC Setup Externally Specified Recording Mode EXT REC Setup Manual Recording SetupREC Setup Camera Title Camera Title System Setup System Setup Time Adjusting Time Adjusting Password Operation Password OperationSkip Alarm Recall Skip Alarm Recall Disk End Mode Disk END ModeVMD Setup Video Motion Detector SetupSerial Port Setup Serial Port SetupCamera Number Setup CAM NO. Setup only for Psdata Multi Sequence Setup Multi Sequence Setup Camera View Setup Camera View Setup Spot Sequence Setup SpotSequence Setup Information System Log System LOG Host Setup Host Setup Network ConfigurationUser Setup User Setup FTP Send by Periodic Timer FTP Send by Periodic Timer FTP Client Setup FTP Client SetupNetwork Video Setup Network Video Setup Mail Setup Mail SetupMain Panel Operating WJ-HD200Multiscreen Selection Button Alarm Reset button Alarm ResetMain Control Panel Camera Selection button Camera SelectLeft Right Down Time & Date Search button Time&Date SearchCamera Control View button Camera Control View PAN/TILT ControlAlarm List Phenomenon Cause TroubleshootingSelect Mode When accessing via the networkSpecifications & Appendix Specifications Standard Accessories Menu Remote Control From System ControllerAppendix ON/OFF Daylight SavingsRS-232C Communication Protocol Transmission CommandResponse Command Basic Operation Command TableAlarm Control Media Control Setup ControlMiscellaneous Control Data Log ControlQKM InquiryPower-on Procedures HDD MaintenanceWhen to Maintain HDD Who to Maintain HDD When Error Indicator is Lit When Full Indicator is Lit Resetting Disk EndAuto-remove Disk MenuAbbreviation Status Required Capacity Disk MenuFormatting HDD HDD Format Removing Logical Link Remove LinkNOW Formatting HDD Format →SET Done Restarting RestartHttp Download and Viewing Images Mail Contents N0103-0 V8QA6017AN

WJ-HD200 specifications

The Panasonic WJ-HD200 is a versatile and robust digital video recorder (DVR) designed primarily for high-quality surveillance applications. This device stands out for its exceptional recording capabilities, exemplifying Panasonic’s commitment to innovation in video technology.

One of the main features of the WJ-HD200 is its ability to support multiple video input channels. This DVR can accommodate up to 16 cameras simultaneously, making it an ideal choice for larger installations requiring comprehensive monitoring. Its capability to handle various camera types, including analog and IP cameras, enhances its flexibility and usability in diverse environments.

Another significant characteristic of the WJ-HD200 is its high-resolution recording. The device allows for real-time recording at a resolution of up to 720 x 480 pixels, ensuring that captured footage remains sharp and detailed. Users can adjust bit rates and frame rates according to specific surveillance needs, providing tailored video quality without sacrificing storage space or clarity.

A notable feature is the integration of advanced motion detection technology. This allows the WJ-HD200 to start recording only when motion is detected, optimizing storage usage and making it easier for users to review footage when needed. Coupled with this is the device’s intelligent search functionality, which enables quick navigation through recorded content by identifying motion events, thus saving time during investigations.

The WJ-HD200 utilizes a RAID (Redundant Array of Independent Disks) configuration, which improves data reliability and redundancy. This technology minimizes the risk of data loss due to disk failure, ensuring continuous operation and security for vital footage. Moreover, the DVR supports efficient data management with a built-in networking capability. Users can remotely access the system via a network connection, allowing for real-time monitoring and management from virtually anywhere.

Finally, the user-friendly interface of the WJ-HD200 further enhances its appeal. The system is designed for easy setup and operation, featuring a logical menu structure that simplifies navigation. With various output options, including VGA and composite outputs, users can connect the DVR to different display systems effortlessly.

In summary, the Panasonic WJ-HD200 combines high channel capacity, exceptional recording quality, advanced motion detection, reliable storage solutions, and user-friendly features. This DVR is a solid choice for anyone seeking a dependable and efficient surveillance solution.