Elta 2308 manual No Repea & Random REPEAT-1, Repeat Folder Random, Mode, Programming MP3

4.If whole track was finished during the random play mode or if [STOP] key is pressed during the random play mode, the system goes to the stop mode and cancels the random play mode.

5.If [FF/SKIP+] key is pressed during the random play mode, the system skips next at random. If [FF/SKIP+] key is pressed on the tune of the final track, the system searches next lap at random.

6.If [FB/SKIP-] key is pressed during the random play mode, the system searches the beginning of the current track, but doesn’t skip track down.

MP3 Modus

1. If [MODE] key is pressed, the system changes the mode(as follows intention).

↓

►	MP3 →	► AL BUM MP3
	023	REP. 023
NO REPEA & RANDOM		REPEAT-1

→ ►	MP3 →		RANDOM
		►	MP3
ALL	023		023
REP.
REPEAT FOLDER			RANDOM

2.During the repeat-1 mode, the system repeats the current track of the MP3

3.During the repeat-folder mode, the system repeats the current folder track of the MP3

4.During the repeat-all mode, if it reaches the end of the tune of the final track, it is usually returned to the head track.

5.If whole track was finished during the random play mode or if [STOP] key is pressed during the random play mode, the system goes to the stop mode & cancels the random play mode.

6.If [FF/SKIP+] key is pressed during the random play mode, the system skips next at random. If [FF/SKIP+] key is pressed on the tune of the final track, the system searches next lap at random.

7.If [FB/SKIP-] key is pressed during the random play mode, the system searches the beginning of the current track, but doesn’t skip track down.

MODE

CD: None → Repeat 1 → Repeat all → Random → None.

MP3: None → Repeat 1 → Repeat folder → Random all → Random → None…

PROGRAMMING MP3

The MP3 player enable program 10 tracks in a sequence of your choice.

1.Press PROGRAM button in stop mode the display will show “P01” and “PROGRAM” will be blinking.

2.Press FF/SKIP+ and FB/SKIP- button to select the desired track to be programmed. or Press FOLDER DN and FOLDER UP button on the remote control to select the desired next folder’s track to be programmed.

3.Press PROGRAM button to entry memory.

4.Continue to program, repeat steps 2 and 3.

5.Press PLAY / PAUSE button on program mode to play the programmed tracks.

15.