RECOMMENDED EQUIPMENT
STICK
K704 Accessory Kit- (400 AMP Capacity) which includes:
•Electrode Holder & Cable
•Work Clamp & Cable
•Headshield
K875 Accessory Kit- (150 AMP Capacity)
WIRE FEED
K449 LN-25- Includes internal contactor for across the arc operation (no control cable). Provides “cold” electrode until gun trigger is pressed. Includes gas solenoid.
K1870-1LN-15 Across the Arc Model
Magnum Gun and Magnum Gun Connector Kit are required for gas-shielded welding. Innershield Gun is required for gasless welding.
K126-2Magnum 350 Innershield Gun
K1802-1Magnum 300 MIG Gun (for LN-25)
K470-2Magnum 300 MIG Gun (for LN-15)
K1500-1Gun Receiver Bushing (for LN-15 & K126-2)
TIG
Magnum™ TIG Torch
K1783-4 - TIG Torch
KP509-Magnum Parts Kit and Argon Gas
K930-2 TIG Module - Provides high frequency and shield- ing gas control for AC and DC GTAW (TIG) welding applica- tions. Its compact case is designed foe easy carrying, com- plete with a handle. High frequency bypass is built in Requires K938-1Contactor Kit, K936-4Control Cable, and K814 Arc Start Switch.
K938-1Contactor Kit - For use with TIG Module, Provides a “cold” electrode until the triggering device (Arc Start Switch) is pressed.
K936-4Control Cable - Connects TIG Module to RANGER® 3 PHASE.
Optional TIG Equipment:
K939-1Docking Kit - For Mounting the K930-2 TIG Module on top of the RANGER® 3 PHASE.
K937-45Control Cable Extension - Allows TIG Module to be operated at distances up to 200ft. From the power source. Available in 45ft. (13.7m).
K814 Arc Start Switch
Plasma
K1580-1Pro-Cut 55
(Requires Full KVA Adapter K1816-1)
