CV-305
DIAGRAM FOR WIRE FEEDERS THAT CLOSE A
SET OF CONTACTS TO GET POWER SOURCE OUTPUT:
LINCOLN POWER SOURCE
|
| N.A. |
|
| |
OUTPUT | 115 V.A.C. | 42 V.A.C. | N.B. | N.A. | |
CONTACTOR |
| ||||
CONTROL | SUPPLY | SUPPLY |
| } | |
} | } | } |
| ||
4 | 2 | 31 32 | 41 42 | GND 75 76 77 | |
| } | MIN. | MAX. | |
} | GND |
|
| |
|
|
| ||
WIRE FEEDER |
|
| 10 K OHM | |
| INPUT POWER |
|
| } |
|
|
|
| |
CONTACTS CLOSE |
|
|
|
|
TO GET POWER |
|
| REMOTE OUTPUT | |
SOURCE OUTPUT | N.D. |
|
| CONTROL |
(IF SO EQUIPPED) | ||||
|
| |||
DIAGRAM FOR WIRE FEEDERS THAT SUPPLY A VOLTAGE TO GET POWER SOURCE OUTPUT:
LINCOLN POWER SOURCE
N.A.
OUTPUT | 115 V.A.C. | 42 V.A.C. | N.B. | N.A. | |
CONTACTOR |
| ||||
CONTROL | SUPPLY | SUPPLY |
| } | |
} | } | } |
| ||
4 | 2 | 31 32 | 41 42 | GND 75 76 77 | |
RELAY | RELAY CONTACT |
| (NORMALLY OPEN) |
| RELAY COIL |
| N.C. |
} | } | MIN. | MAX. | |
GND |
|
| ||
|
|
|
| |
VOLTAGE SUPPLIED | WIRE FEEDER |
|
| 10 K OHM |
TO GET POWER | INPUT POWER |
|
| } |
|
|
| ||
SOURCE OUTPUT |
|
|
|
|
|
|
| REMOTE OUTPUT | |
| N.D. |
|
| CONTROL |
(IF SO EQUIPPED) | ||||
|
| |||
CONNECTION OF NON-LINCOLN WIRE
DIAGRAMS
N.A. CONNECTIONS 31 AND 32 MAY NOT BE PRESENT ON ALL MACHINES.
N.B. POWER SOURCE MUST BE PROPERLY GROUNDED.
N.C. RELAY COIL MUST BE RATED FOR THE SAME VOLTAGE THAT IS SUPPLIED BY THE WIRE FEEDER.
N.D. IF THE WIRE FEEDER REQUIRES AN INPUT VOLTAGE OTHER THAN 42 V.A.C., OR 115 V.A.C. ON SOME MACHINES, AN EXTERNAL POWER SUPPLY FOR THAT VOLTAGE MUST BE PROVIDED.