Lincoln Electric IM10024 manual Figure B.1 Feed Head Adjustment

B-2 OPERATION B-2

Loosen this Socket

Head Screw to Adjust

Faceplate Angle

5/16” Allen

Wrench

FIGURE B.1 - FEED HEAD ADJUSTMENT

The Cross Seam Adjuster

Can Be Mounted to the Top or Bottom of the

Gear Box

		Feed Head Rotates
Face-	plate Rotates	360° Around the
360°	Around the	Motor Axis
Drive	Roll Shaft

FIGURE B.2 - HORIZONTAL ADJUSTMENT

					This Adjustment Can			be
					Locked by Tightening
					Two Socket Head Screws						Turn Handle
											to adjust
			MAXsa 29
					MAXsa 22
									Rotating the K96 Allows
										for 2” Movement in
										any Direction in the
										Horizontal Plane
		2 1/2”					2”
C					K96	Horizontal Adjuster
	ross Seam Adjuster
		FIGURE B.3 - VERTICAL ADJUSTMENT
		Use This Screw
				K29 Clamps Can Be Set						Head May Be Rotated
		To Lock Vertical
				to Restrict In and Out Motion						Around the Vertical Axis
		Position

to Distances up to 3 3/4”

K96

Loosen to Rotate

Entire Head Around

Mounting Axis

With K29
	Head
Loosen Screw
	Mounting
With Standard Mounting (M6767)	With Standard Mounting (M6767)
or K29 Vertical Adjuster	or K96 Horizontal Adjuster

MAXSA™ 22 & 29 WIRE DRIVES