Lincoln Electric IM10024 manual General Information, DESIGNClosed-loopFEATURESspeedcontrol- .MAXsa

Page 9

A-2	GENERAL INFORMATION	A-2

DESIGNClosed-loopFEATURESspeedcontrol- .MAXsa™ 22

• Knurled drive rolls.

• Heavy cast aluminum gearbox housing and feed plate assembly.

• Wire straightener.

• Cross Seam Adjuster

• Flux Hopper (not shown)

• Mounting Hardware for accessories

• 32Vdc permanent magnet, high torque motor.

• Conversion kits included to change speed range.

FIGURE A.1 - LOCATION OF MAXsa™ 22 COMPONENTS

Connection

Box

Cross Seam

Mounting

Adjuster

Hardware

Drive Motor

Gear Box	Drive Rolls

MAXsa™ 22 & 29 WIRE DRIVES

Image 9

Contents MAXsa 22 & 29 Wire Drives California Proposition 65 Warnings SafetyElectric Shock can kill Iii Welding and Cutting Sparks can Cause fire or explosionLES Machines À Souder À Thank You Table of Contents 1PRODUCT DESCRIPTIONA-1 MAXsa 22 & 29 Wire DrivesGeneral Information DESIGNClosed-loopFEATURESspeedcontrol- .MAXsaFigure A.2 Location of MAXsa 29 Components InstallationWidth Depth SpecificationsNON-STANDARD Safety Information Location and MountingHigh Frequency Protection System Connections Mounting DimensionsFigure A.3 ConfigurationWire Feed Mechanism Gear Ratio Conversion Kits SeeTable A.1 Drive Roll Kits Remote Sense Lead Specifications Electrode ConnectionsTable A.1 Output Cable Guidelines K325HC5-StoStandard70/min 127mm- 9521 toratio1.88M/mim K325 TC-3 Travel CarriageFigure A.6 Wire Drive Mounting InstallationFigure A.10 Inclined Operation Inclined Operation of TC-3Carriage Bearing Tracking Drive Gear TrackingMaxsa 22 & 29 Wire Drives Head Position AdjustmentsOperation Starting TechniquesFigure B.1 Feed Head Adjustment Accessories Follow these stepsSearch Connect the lug on the electrode cables from Model K226-T K226 Contact AssemblyLong Stickout Extension Current RatingsLoading of Wire K148 Nozzle InstallationOperation K285 Concentric Flux Cone K285 Installation to the K148Figure C.10 K285/K149 K285 installation with the K129 K285 Installation with K149With K148 or K148/K149 combination After K285 Used in Horizontal Fillet ApplicationsWith the K129 Tiny Twin-Arc No zle After K285 in Deep Narrow Gap ApplicationsAdjustment and Locking K29 Vertical Head AdjusterInstallation See Figure C.14 K96 Horizontal Head AdjusterK129 Tiny Twinarc KIT For .045 through 5/641.0-2.0mm WiresFigure C.17 Nozzle InstallationFigure C.18 K225 Twinarc Components K225 Submerged ARC Twinarc KITFigure C.20 Nozzle Installation See Figure C.18K281 Solid Wire Straightener for Wire Loading and AdjustmentTiny Twinarc Maintenance Electric Shock can killSense Lead Fuse HOW to USE Troubleshooting Guide TroubleshootingOutput Problems Diagrams L13370 Dimension PrintPrecaucion Warnung