Friedrich SQ10N10, SQ08N10, SQ05N10, SQ06N10, EQ08N11 manual To Turn On the Timer or Schedule Selected

TIMER OR SCHEDULE OPTIONS 1 OR 2 SELECTION

The control system has one Timer and two Schedule functions:

A.Timer (factory default) - Allows you to command the unit to turn ON and OFF at a time you program. Setting the start, stop and day can be found latter in this manual on page 15.

B.Residential Schedule - When selection #1 is selected, the unit follows a pre-programmed set of operational parameters that covers 7 days of the week with 4 time windows during each day. Each time window has it's own set of 8 operating parameters. Refer to Addendum 1.

C.Commercial Schedule - When selection #2 is selected, the unit follows a pre-programmed set of operational parameters that covers 7 days of the week with 2 time windows during each day. Each time window has it's own set of 8 operating parameters. Refer to Addendum 1.

To change the TIMER/SCHEDULE selection, press and hold the	SCHEDULE
		TIMER
button for 3 sec, then let go.

FRR139

The display shows the TIMER is selected. Press the button once and let go.

SCHEDULE

FRR137

The display shows option 1 (Residential Schedule) is selected. Press

the button once and let go.

SCHEDULE

FRR138

The display shows option 2 (Commercial Schedule) is selected.

To save and exit selection, press the TIMER SET button (Figure 4, Page 15).

F

AUTO FAN

SET POINT

FRR136

The display reverts to the normal display.

NOTE: The schedule options 1 and 2 have factory pre-programmed settings which can only be changed by using the WiFi FriedrichLink™ adaptor (an accessory). With it, you can create your own custom schedule program. See page 10 for more information.

NOTE: Once you have selected the TIMER you must first set the following before turning it on.

1.Set time and day

2.Set start time

3.Set stop time

See timer settings on next page.

To Turn On the Timer or Schedule Selected

FRR139

Press the TIMER button and let go. The system will operate in the mode

SCHEDULE

mode option (1, 2 or Timer) you selected. At the above image, TIMER is selected and turned on.

14