Milwaukee HEAVY-DUTY CIRCULAR SAW manual Adjusting Bevel Angle Figs

Page 7

Adjusting Bevel Angle (Figs. 6 & 7)

1.Unplug tool.

2.To adjust the angle of the cut, hold the saw by the Tilt-Lok™ handle and loosen the bevel adjusting lever by lifting it up towards the blade (Fig. 6).

Fig. 6

3.Hold the front handle and rotate the saw by the Tilt-Lok™ handle to the desired angle as indicated by the markings on the bevel scale (Fig. 7).

Fig. 7

4.Move the bevel adjusting lever away from the blade and push down to secure the position.

Adjusting Tilt-Lok™ Handle Angle (Figs. 8 & 9)

This circular saw is equipped with an adjustable handle. The Tilt-Lok™ feature allows the user to adjust the angle of the handle for optimum cutting positions.

1.Unplug tool.

2.Press and hold the handle lever release button in.

3.Loosen the handle release lever by lifting it up and away from the Tilt-Lok™ handle (Fig. 8).

Fig. 8

4.To adjust the handle position, hold the front handle and rotate the Tilt- Lok™ handle to the desired angle as indicated by the handle rotation adjustment markings (Fig. 9). The Tilt-Lok™ feature has eight (8) detents which allow the handle to snap into position. Allow the detent to snap into place.

Fig. 9

NOTE: The blade depth setting will determine the range of Tilt-Lok™ positions available for the application. See “Adjusting Depth” for in- structions on adjusting the blade depth.

5.Push the handle release lever back into the handle until it snaps into place.

WARNING!

Do not operate saw with handle lever release button pressed in or with handle not locked into position.

NOTE: The saw will not operate if the handle release lever is not properly secured.

WARNING!

If the Tilt-Lok™ handle moves with the handle release lever in the locked position, do not operate

saw. Return the circular saw to a MILWAUKEE ser-vice facility for repair immediately.

Adjusting the Blade to Shoe (Figs. 10 & 11)

The shoe has been adjusted at the factory to a 90 degree setting. Inspect the saw regularly to make sure the blade is 90 degrees to the shoe.

1.Unplug tool.

2.Set the bevel pointer to zero (Fig. 10).

Fig. 10

page 7

Image 7

Contents Operators Manual Service Work Area Safety Power Tool USE and CareElectrical Safety Personal SafetyCauses and Operator Prevention of Kickback Specific Safety Rules Circular SawsExtension Cords Guidelines for Using Extension CordsRecommended Minimum Wire Gauge For Extension Cords Grounding6394 FunctionaldescriptionCat Volts No Load Blade Arbor Depth of Cut Size 6390-20Selecting Blade Tool AssemblyInstalling and Removing Blades Figs Adjusting Depth FigsAdjusting Tilt-Lok Handle Angle Figs Adjusting Bevel Angle FigsOperation Bevel adjustment screwGeneral Operation Figs Applications TroubleshootingElectric Brake Cat. No Cutting Masonry and Metal Cutting Large Panels FigRipping Wood Cross-Cutting Wood FigRepairs MaintenanceFive Year Tool Limited Warranty AccessoriesUTILISATIONETENTRETIENDEL’OUTILÉLECTRIQUE Conserver CES Instructions Sécurité DU Lieu DE TravailSécurité Électrique Sécurité IndividuelleCauses du retour d’outil et prévention par l’utilisateur Règles DE Sécurité Particulière Scies CirculaireOutils pourvus d’une fiche de cordon à deux dents Calibres minimaux recommandés pour Les cordons de rallongeMise À LA Terre Avertissement Cordons DE RallongeDescriptionfonctionnelle Pictographie SpécificationsRéglage de profondeur Figs et Installation et retrait de la lame Figs etMontage DE Loutil Avertissement Choix des lamesRéglage de l’angle de la poignée Tilt-Lok Figs et Vis de réglage de biseau Figs etVis du biseau Maniement AvertissementRègles générales d’opération Figs et Dépistage des dérangements Frein Életronique No de catCoupe dans la maçonnerie ou les métaux Coupe des grands panneaux FigRefente du bois Coupe transversale du bois FigRéparations Maintenance AvertissementAccessoires Avertissement Garantie Limitée DE L’OUTIL DE Cinq ANSUSO Y Cuidado DE LAS Herramientas Eléctricas GUA0RDE Estas Instrucciones Seguridad EN EL Área DE TrabajoSeguridad Eléctrica Seguridad PersonalReglas Especificas DE Seguridad Sierras Circulares Extensiónes Eléctricas Tierra ¡ADVERTENCIAGuías para el uso de cables de extensión Cat Volts RPM sin Diam. de DescripcionfuncionalProfundidad Carga Disco De Corte a 6390-20 Ajuste de profundidad Figs y Ensambaje DE LA Herramienta ¡ADVERTENCIASelección del disco Cómo instalar y retirar las cuchillas Figs yCómo ajustar el ángulo del bisel Figs y Tornillo de ajuste de bisel Operacion ¡ADVERTENCIAOperación en general Figs y Aplicaciones Solución de problemasFreno eléctrico Cat. No Corte de concreto y metal Cortando paneles grandes FigCortando a lo largo Cortando madera a través FigReparaciones Mantenimiento ¡ADVERTENCIAGarantía Limitada DE Cinco Años Accesorios ¡ADVERTENCIASawdust