Initial Charger Setup | P12 |
7521 AND 7522 BATTERY CHARGERS |
During Initial Charger Setup, or after resetting to factory defaults, the following screens require user input to provide functional battery charging.
1.Using the left 
or right 
arrow button, scroll to the desired language. Press the Select button.
2.Once the desired language is highlighted, press OK button. Press the Cancel button to go back.
3.Using the left 
or right 
arrow button, scroll to the desired battery type. Press the Select button.
Note: If User mode is selected batteries will not charge until Absorb and Float voltages are altered.
See page
4.Once the desired battery type is highlighted, press the OK button. Press the Cancel button to go back.
5.Press the Back button twice to go to the Charger Summary screen.
Note: If battery type is unknown, see the label on the battery or contact a qualified marine electrician.
CAUTION 
Selecting a battery type different from the connected batteries could limit the life of the batteries and damage them.
Your charger is now operational.
For advanced setup options and information on Absorb and Float voltage, as well as absorb timers,
See page 12.
Specifications are subject to change. See bluesea.com/P12 for current information. | 11 |