Optional Accessory
P12 Battery Charger Remote
Indicates battery charger stage, alerts, and controls basic battery charger functions LED Indicators
P12
7520 BATTERY CHARGER REMOTE
Scan for additional product information
•Charging: Quick check for green light confirms charging
•Charge Stage: Displays charging stage including PreFloat for each battery
•Equalize: Indicates when the charger is in equalization mode
•Fan Mode: Indicates charger’s internal fan mode
•Charge Output: Displays the percentage of output current for each battery. Will also indicate maximum output setting when maximum output is adjusted to accommodate for AC source limitations.
•Alert: Provides warning and alert status for quick diagnostics
Four Control Buttons
•Fan: User adjustable settings (OFF, LOW, or HIGH)
•Dim/ Alarm: Provides adjustment to brightness of LEDs on display as well as Silence function for alarms.
•Output: User adjustable charger output when AC source limitations exist that require lowering the AC current draw.
•Standby: Places P12 Battery Charger into standby mode
Specifications
Minimum Operating Temperature | −20°C (−4°F) | |
Maximum Operating Temperature | 60°C (140°F) | |
Minimum Storage Temperature | −30°C (−22°F) | |
Maximum Storage Temperature | 70°C (158°F) | |
Mounting Hole Cutout | ||
Dimensions | Height: | 3.01” (76.56 mm) |
| Width: | 4.15” (105.46 mm) |
| Depth: | .95” (24.01 mm) |
Mounting Hardware Included | #6 Screws | |
Electrical: |
|
|
On State Operating Current | <300mA sourced from charger | |
Communications: |
| |
Protocol |
| Proprietary |
Maximum Cable Length | 150 ft (45.7 m) | |
Cable |
| Cat5e (Standard US) |
Regulatory
Surface Mount Gasket creates an IP67 waterproof seal on unit
Cable Connection
The P12 Battery Charger Remote uses one Cat5e cable for communication and power.
P12 Battery
Charger Remote
P12 Battery Charger
RJ45 Port
24Specifications are subject to change. See bluesea.com/P12 for current information.