Blue Sea Systems P12 user manual Warranty and Contact Information, Date of first purchase means

Page 30

Warranty and Contact Information

Register your P12 Battery Charger at bluesea.com/warranty

Blue Sea Systems stands behind its products for as long as you own them. Blue Sea Systems will replace or issue a credit for any of its products found to be defective in materials or manufacture. P12 Battery Chargers and P12 Remote Displays are warranted for a period of five years from the date of first purchase. No compensation will be allowed for products not returned to Blue Sea Systems for analysis, nor will compensation be made for labor required to replace any defective product. Please contact Customer Service for an RMA number prior to shipping any product back to Blue Sea Systems. Blue Sea Systems cannot accept liability for damage due to the use of the P12 Battery Charger.

“Date of first purchase” means:

1.The date on which the product was purchased by the first retail customer

2.The date on which the first retail customer purchases a vessel on which the product was installed

Blue Sea Systems will (at its sole discretion) repair or replace any product which is:

1.Proven to be defective in materials or workmanship

2.Returned to Blue Sea Systems (or its agent) during the warranty period in accordance with this warranty

The replacement battery charger may be new or refurbished in as-new condition. Such repair or replacement will be the sole remedy by Blue Sea Systems under this warranty. Any repaired or replacement product will be warranted in accordance with this warranty for the unexpired balance of the warranty period on the original product.

Blue Sea Systems Technical Support

Monday through Friday 8:00am - 5:00pm (PST) 1-800-222-7617

techsupport@bluesea.com

Related Products

P12 Battery Charger LED Remote PN 7520

360 Panel - P12 Battery Charger LED Remote PN 1521

SI-Series Automatic Charging Relay PN 7610

ML-Series Automatic Charging Relay PN 7622

ML-Series Remote Battery Switch PN 7700

Class-T Fuse Block PN 5502

Safety Fuse Block (MIDI®/AMI®) PN 7720

7520

1521

7610

7622

7700

5502

7720

28Specifications are subject to change. See bluesea.com/P12 for current information.

Image 30
Contents P12 Page Table of Contents P12 P12 Battery Charger Overview Charging Specifications Product Dimensions Installation ClearancesAccessory Pack Included ComponentsSupplies Needed Socket wrenchRing terminals Installation Instructions Installation StepsAC Strain Relief Wiring Connections Optional Installations see pagesInitial Charger Setup Advanced Charger Setup Reset to Manufacturer Defaults Absorption Parameters and Timers Maximum Charge Temperature The default is 50ºC Temperature ParametersMinimum Charge Temperature The default is 0ºC Battery Temperature Compensation TempcoPrior to Equalization EqualizationDefinition of Equalization Equalization ProcessP12 Charger Setup Configuration MenuDisplay Setup Screen SummarySystem Status Temperature ParametersSystem Status Absorb Timers System Status Hour MeterAlert Screens and Diagnostics DC Output Voltage Too High AC Input Voltage Too LowAC Input Voltage Too High DC FuseOptional Installation Optional Connection FuseSI ES ES SI Engine ACR Cable Connection Optional AccessorySpecifications Four Control ButtonsDimensioned Drawing Charging Display IndicatorsFan Mode Charge StageAlerts and Diagnostics ButtonsBlue Sea Systems Technical Support Warranty and Contact InformationDate of first purchase means Related ProductsTwin Engine P12 Charge Management System980012000 Rev