Blue Sea Systems P12 user manual Temperature Parameters, System Status Absorb Timers, History

Page 21

Screen Summary (continued)

Temperature Parameters

The Temperature Parameters screen indicates the minimum and maximum operating temperature based on the temperature sensor. Read the Temperature Parameters section on page 15 before making any adjustments.

Options:

-Select Units and temperature parameters to adjust.

How to Get Here:

From the Configuration Menu, select Temp Limits.

P12

7521 AND 7522 BATTERY CHARGERS

System Status

The System Status screen indicates which systems are functioning and the current firmware installed on the device.

Options:

-Select the Back button to go to the Configuration Menu.

-Select the Next button to view the status of the Absorb timers.

How to Get Here:

From the Configuration Menu, select Diagnostics

System Status Absorb Timers

The System Status Absorb Timers screen indicates the current Absorb time of each battery bank, as well as the

AC input voltage. The up down arrows indicate if time is being added or subtracted from the timer. If paused the charger is in Float or Standby and the Absorb Timer will remain at its current time.

Read about Absorb Timers on page 14.

Options:

-Select the Back button to go to the System Status Screen.

-Select the Next button to view the charger Hour Meter Screen.

How to Get Here:

From the System Status Screen, select the Next button.

System Status Hour Meter

The System Status Hour Meter screen displays the overall time the charger has spent running at different amperage levels.

Options:

-Select the Back button to go to the System Status Absorb Timers Screen.

How to Get Here:

From the System Status Absorb Timers Screen, select the Next button.

History

The History screen graphically displays the charging voltage and amperages per battery.

Options:

-Select the Back button to go to the Charger Summary Screen.

-Select individual batteries to view charging summary.

-Press and hold any Bat button for 3 seconds to switch from First 8 Hour view to Continuous.

How to Get Here:

From the Charger Summary Screen, select the History button.

Specifications are subject to change. See bluesea.com/P12 for current information.

19

Image 21
Contents P12 Page Table of Contents P12 P12 Battery Charger Overview Charging Specifications Installation Clearances Product DimensionsIncluded Components Accessory PackSupplies Needed Socket wrenchRing terminals Installation Instructions Installation StepsAC Strain Relief Optional Installations see pages Wiring ConnectionsInitial Charger Setup Advanced Charger Setup Reset to Manufacturer Defaults Absorption Parameters and Timers Minimum Charge Temperature The default is 0ºC Temperature ParametersMaximum Charge Temperature The default is 50ºC Battery Temperature Compensation TempcoDefinition of Equalization EqualizationPrior to Equalization Equalization ProcessP12 Display Setup Configuration MenuCharger Setup Screen SummarySystem Status Absorb Timers Temperature ParametersSystem Status System Status Hour MeterAlert Screens and Diagnostics AC Input Voltage Too High AC Input Voltage Too LowDC Output Voltage Too High DC FuseOptional Connection Fuse Optional InstallationSI ES ES SI Engine ACR Specifications Optional AccessoryCable Connection Four Control ButtonsDimensioned Drawing Fan Mode Display IndicatorsCharging Charge StageButtons Alerts and DiagnosticsDate of first purchase means Warranty and Contact InformationBlue Sea Systems Technical Support Related ProductsP12 Charge Management System Twin Engine980012000 Rev