Troubleshooting
Fault Messages
When the Freedom SW 3000 detects a fault condition, the fault is displayed on the SCP and also is indicated by the illuminated red Fault light on the Freedom SW 3000 front panel. A fault affects the operation of the unit. See “Fault Types” on page 45 for an explanation of the different fault types.
You can view the 20 most recent fault messages of the Freedom SW 3000 by selecting Fault Log from the Device Info menu in the Freedom SW 3000 Advanced Menu.
If several faults occur before you can acknowledge or clear them, they are displayed together on a warning list. This list contains messages from every
To view a message from a fault list:
1.On the list, use the up arrow or down arrow button to highlight the message you want to view.
2.Press Enter.
The complete message appears.
After viewing the message, you can return to the fault list by pressing Exit or continue to the menu for the device that caused the fault by pressing Enter. Each time you return to the list after viewing a complete message, the viewed message is removed from the list.
If you have left the fault list, you can view them at any time from the System Settings menu.
To view a fault list:
1.On the Select Device menu, highlight System and press Enter.
2.On the System Settings menu, highlight View Fault List.
3.Press Enter.
50 | Freedom SW 3000 Owner’s Guide |