SM 2610008537
Trouble Shooting
!WARNING
PROBLEM
Read instruction manual first! Remove plug from the power source before making adjustments or assembling accessories.
TROUBLE: TOOL WILL NOT START
1.Power cord is not plugged in.
2.Power source fuse or circuit breaker tripped.
3.Cord damaged.
4.Burned out switch.
REMEDy 1. Plug tool into power source.
2.Replace fuse or reset tripped circuit breaker. (If the product repeatedly causes the circuit or fuse to trip/blow, discontinue use immediately and have it serviced by an Authorized Skil Service Center or Service Station.)
3.Inspect cord for damage. If damaged, have cord replaced by an Authorized Skil Service Center or Service Station.
4.Have switch replaced by an Authorized Skil Service Center or Service Station.
| TROUBLE: TOOL DOES NOT COME UP TO SPEED | |
PROBLEM | 1. Extension cord has insufficient gauge or is too long. | |
| 2. | If equipped with variable speed, tool may not set at maximum RPM. |
| 3. | Low house voltage. |
REMEDy | 1. Replace with adequate extension cord (Page 12). | |
| 2. | If equipped with variable speed, check speed setting. |
| 3. | Contact your electric company. |