Hitachi EC 129 Specifications, Standard Accessory, Applications, Prior to Operation

Page 10

English

SPECIFICATIONS

Model

 

EC129

 

 

 

 

Motor

 

Single-Phase, Induction Motor

 

 

 

 

Power Source

 

Single-Phase, 120V AC 60Hz

 

 

 

 

Output Power

 

2.5 HP

 

(1.8 KW)

 

 

 

 

 

 

 

Current

 

15.0 A

 

 

 

 

Tank Capacity

 

5 gal.

 

(18.9 ltr)

 

 

 

 

 

 

 

Maximum Pressure

125 PSI

(8.6 bar)

 

 

 

 

 

 

 

 

 

at 40 PSI

6.0 CFM

 

 

(2.8 bar)

(170 ltr/min)

Free Air

 

 

 

 

at 90 PSI

4.7 CFM

Delivery

 

(6.2 bar)

(133 ltr/min)

 

 

 

 

 

 

at 100 PSI

4.4 CFM

 

 

(6.9 bar)

(125 ltr/min)

 

 

 

 

Lubrication

 

Oil

 

 

 

 

ACCESSORY

WARNING: Accessory other than these shown below can lead to malfunction and resulting injuries.

2. Power switch

Ensure that the knob of the pressure switch is in the “OFF” position (Fig. 2). If the plug is connected to a receptacle while the knob is in the “ON” position, the compressor will start operating immediately and can cause serious injury.

STANDARD ACCESSORY

Dipstick

1

APPLICATIONS

Air source of the pneumatic nailer and stapler.

WARNING: Never use compressor for applications other than compressor for pneumatic nailer and stapler.

PRIOR TO OPERATION

1. Power source

Ensure that the power source to be utilized conforms to the power source requirements specified on the product nameplate.

Knob of the pressure switch

Fig. 2

3. Extension cord

When the work area is far away from the power source, use an extension cord of sufficient thickness and rated capacity (refer page 7). The extension cord should be kept as short as practicable.

WARNING: Damaged cord must be replaced or repaired.

4. Confirm the power receptacle

If the power receptacle only loosely accepts the plug, the receptacle must be repaired. Contact the nearest electric store for repair service.

If such a faulty receptacle is used, may cause overheating, resulting in a serious hazard.

— 10 —

Image 10
Contents Avertissement Contents Meanings of Signal Words Important InformationSafety Check Damaged Parts and AIR Leak Keep Motor AIR Vent CleanUSE only Genuine Hitachi Replacement Parts Keep ALL SCREWS, Bolts and Covers Tightly in PlaceSafety Valve Must Work Properly Replacement PartsUSE of this Product will Expose YOU to Grounding Instructions Extension CordMake Them Available to Other Users of this Tool Operation and Maintenance Name of PartsStandard Accessory SpecificationsAccessory ApplicationsTransport 11 ÑStart up Adjustment of working pressureOperation ShutdownCleaning the intake filter MaintenanceService and Repairs Draining tankInformations Importantes Signification DU Vocabulaire DE Signalisation14 Ñ Bien Lire Toutes LES Instructions Sécurité15 Ñ 16 Ñ Pièces DE Rechange 17 ÑCordon DE Rallonge Instructions DE Mise À LA Terre18 Ñ 19 Ñ NOM DES Pièces Utilisation ET Entretien20 Ñ Avant L’UTILISATION AccessoireAccessoire Standards 21 Ñ22 Ñ DŽmarrage Utilisation23 Ñ RŽglage de la pression de travailEntretien 24 ÑService APRÈS-VENTE ET Réparations 25 ÑSignificado DE LAS Palabras DE Señalización Información Importante26 Ñ LEA Todas LAS Instrucciones Seguridad27 Ñ 28 Ñ Drene EL Tanque DE Depósito Piezas DE Reemplazo29 Ñ No Pare EL Compresor Tirando DEL EnchufeCable Prolongador Instrucciones Para LA Puesta a Tierra30 Ñ 31 Ñ Nomenclatura Operación Y Mantenimiento32 Ñ Accesorio Estándar EspecificacionesAccesorio AplicacionesTransporte 34 ÑPuesta en funcionamiento Operación35 Ñ Ajuste la presi-n de trabajoMantenimiento 36 ÑServicio Y Reparaciones 37 ÑSteve Reynolds Blvd Norcross, GA Kestrel Road Mississauga on L5T 1Z5

EC 129 specifications

The Hitachi EC 129 is a cutting-edge electric compressor designed to meet the demanding requirements of various industrial applications. With its robust construction and advanced engineering, the EC 129 stands out for its efficiency and reliability, making it a preferred choice for businesses looking to enhance their productivity.

One of the main features of the Hitachi EC 129 is its powerful motor, which operates efficiently while delivering a high airflow rate. This feature ensures that the compressor can easily handle a range of tasks, from powering pneumatic tools to supporting larger systems. The EC 129's motor is specifically engineered for reduced power consumption without sacrificing performance, which translates to lower operational costs for businesses.

In terms of technology, the Hitachi EC 129 incorporates a sophisticated variable frequency drive (VFD). This innovative feature allows the compressor to adjust its speed according to demand, resulting in improved energy efficiency. The VFD not only enhances performance but also prolongs the lifespan of the machine by reducing wear and tear on its components.

Another significant characteristic of the EC 129 is its compact design. Unlike traditional compressors that require substantial floor space, the EC 129 is engineered to fit into confined spaces without compromising on performance. This makes it an ideal solution for industrial environments where space is at a premium.

The EC 129 also boasts advanced noise reduction technologies, making it one of the quieter models in its class. This is particularly advantageous in workplaces where noise levels must be kept to a minimum for safety and comfort. The compressor operates smoothly, ensuring that it does not disrupt the working environment while delivering consistent performance.

Maintenance is made easy with the Hitachi EC 129, featuring user-friendly access to critical components for routine checks and servicing. This ensures that the compressor can be kept in optimal condition, guaranteeing uninterrupted service and reliability.

Overall, the Hitachi EC 129 combines power, advanced technology, and user-friendly features, making it a top choice for industries that demand efficient and reliable compressed air solutions. Whether in manufacturing, construction, or other sectors, the EC 129 promises to deliver exceptional performance tailored to diverse operational needs.