CHARGER CONTROL |
| |
currently: |
| AUTO |
OFF AUTO | ON | OK |
PRESS THREE TIMES:
•The CHARGER CONTROL screen appears. This allows the operation of the Inverter’s battery charger to be preset for an available AC source.
<OFF> disables all charger functions in the Inverter.
<AUTO> enables automatic battery charging, silent, and
<ON> also recharges the batteries, but eventually remains in the “float” charging stage (and eliminates silent mode) until the AC input is disconnected.
<OK> returns to the point in the menu system where you entered the AC INPUT CONTROL menu cycle.
NOTE: The charger’s operation is independent of the inverting function. With the inverting function OFF, the charger can be set to come on when AC is available, but the inverting function will stay off with AC disconnected.
CHARGER MODE CONTROL |
| |
global charger mode |
| |
BULK | EQ | OK |
PRESS FOUR TIMES:
•The CHARGER MODE CONTROL screen appears, allowing the MATE to issue system (global) recharging commands.
Pressing <EQ> on the CHARGER MODE CONTROL screen brings up the EQUALIZE CONTROL screen
EQUALIZE CONTROL | |
eq enabled |
|
START STOP | OK |
NOTE: EQ is not normally used with the
BULK CONTROL |
|
START STOP | OK |
•Pressing <BULK> brings up the BULK CONTROL screen. This allows the user to manually start or stop a bulk charge cycle by pressing the <START> or <STOP> soft keys respectively.
BULK CONTROL |
| BULK CONTROL |
|
bulk charge started |
| bulk charge stopped |
|
OK | MAIN | OK | MAIN |
•Once the <START> or <STOP> soft keys are pressed, the BULK CONTROL screen shows the status. The user can press <OK> to return to the CHARGER MODE CONTROL screen, or <MAIN> to return to the main MATE menu.
18