| ||
sum screen | 19 minutes | |
delay time |
| |
BACK | INC | DEC |
| ||
sum screen | 19 minutes | |
delay time |
| |
BACK | INC | DEC |
summary control
BACK TYPE DELAY ROLL
choose category:
PG1 SUMRY COM MAIN
Sum screen delay time in SUMMARY mode shows how long it takes for a SUMMARY screen to be automatically displayed. This time can be increased or decreased by pressing the <INC> and <DEC> soft keys.
After the SUMMARY screen delay time is chosen, press the
<BACK> soft key to return you to the summary control screen.
Return to the MAIN menu by pressing the <BACK> soft key to return to SETUP/MATE/PAGE2, and then pressing the <MAIN> soft key.
COMMUNICATION SETUP SCREENS
This part of Setup assists in communication between the Inverter and MATE. The MATE communicates commands to different components. If a HUB is present, it needs to be able to recognize any newly added or moved devices. (The Inverter is normally the only component connected to the HUB, but multiple components are possible.)
A comm error doesn’t mean the system is failing, but that the MATE is looking for a component that has been moved from one HUB Port to another or has been disconnected completely. The MATE is trying to account for the system components.
12:00:30P
SUM STATUS SETUP ADV
Any time you switch devices from one port to another, or any time you get a comm error, follow these steps:
To reach the COMM screen, press the <SETUP> soft key from the Main screen.
NOTE: Disconnecting and then reconnecting the MATE’s CAT5 cable it will perform the same task, but the cable can be hard to remove from a mounted MATE.
23