SETUP SCREENS
The Setup screens allow you to change several settings, to make your system run more smoothly. You can program the amperage size of the AC source, to keep the Inverter from overdrawing a generator. You can program the Summary screen to pop up automatically like a computer screensaver. In advanced systems, you can order the MATE to search for any new devices, in case it has lost communication with the Inverter.
12:00:30P
SUM STATUS SETUP ADV
choose category:
FXMATE
choose category:
SRCH INPUT | MAIN |
P01 | |
ac transfer | Grid |
control |
|
DOWN GRID GEN | PORT |
P01 | |
ac1/grid | 30.0 aac |
limit |
|
DOWN INC | DEC PORT |
P01 | |
ac2/gen | 30.0 aac |
limit |
|
DOWN INC | DEC PORT |
To program the size of an AC source, press the <SETUP> soft key from the MAIN screen.
Press the <FX> soft key to enter the series of menus for Inverter options (referred to here as FX options).
From the SETUP/FX screen, press the <INPUT> soft key. (The SRCH option is not normally required to be used with the
From the SETUP/FX/INPUT screen, you can tell which of two source sizes the Inverter should use. (The next items allow you to set the sizes.) To use grid (utility) power for a certain size, press the <GRID> soft key. To select a generator, press the <GEN> soft key. (The <PORT> soft key is only used if there are multiple Inverters.)
When finished, press the <DOWN> soft key.
To select a grid source of a certain size, press either the <INC> or <DEC> soft keys as appropriate until the value reaches the correct number. When finished, or if you want to set the generator value instead, press the <DOWN> soft key.
To select a generator of a certain size, press either the <INC> or <DEC> soft keys as appropriate until the value reaches the correct number. When finished, press the <DOWN> soft key.
The next menu will allow you to either return to the top, return to the setup menu, or return to the Main screen.
20