Napa Essentials 85-2500 manual AC Power Cord Connection Instructions

Page 6

4.AC POWER CORD CONNECTION INSTRUCTIONS

4.1The charger must be grounded to reduce the risk of electric shock. The charger is equipped with an electric cord having an equipment grounding conductor and a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances.

DANGER: NEVER ALTER CHARGER’S ORIGINAL AC CORD OR PLUG. IF THE PLUG DOES NOT FIT OUTLET, HAVE PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN. IMPROPER CONNECTION CAN RESULT IN THE RISK OF AN ELECTRIC SHOCK. dISCONNECT THE PLUG FROM OUTLET WHEN CHARGER IS IDLE.

4.2This battery charger is for use on a nominal 120-volt circuit and has a grounding plug that looks like the plug illustrated in Figure A. A temporary adapter, which looks like the adapter illustrated in Figures B and C, may be used to connect this plug to a two-pole receptacle as shown in Figure B, if a properly grounded outlet is not available. The temporary adapter should be used only until properly grounded outlet can be installed by a qualified electrician.

DANGER: BEFORE USING AN ADAPTER AS ILLUSTRATED, BE CERTAIN THAT THE CENTER SCREW OF THE OUTLET PLATE IS GROUNDED. THE GREEN-COLORED RIGID EAR OR LUG EXTENDING FROM ADAPTER MUST BE CONNECTED TO A PROPERLY GROUNDED OUTLET. MAKE CERTAIN IT IS GROUNDED. IF NECESSARY, REPLACE THE ORIGINAL OUTLET COVER PLATE SCREW WITH A LONGER SCREW THAT WILL SECURE THE ADAPTER EAR OR LUG TO THE COVER PLATE AND MAKE THE GROUND CONNECTION TO THE GROUNDED OUTLET.

• 4 •

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Model Page Page Personal Precautions Preparing to Charge Battery AC Power Cord Connection Instructions Charger Location DC Connection Precautions Battery in Vehicle or Connection to EngineCharger Features and Controls ON/OFF Switch AmmeterRATE/VOLTAGE Selector Switch Engine StartElectrical Condition of Battery Overload ProtectionBattery Charging Multiple Battery Charging Assembly InstructionsMaintenance Instructions TroubleshootingCustomer Service DSR Professional ProductsPage Manuel D’INSTRUCTIONS Page Page Précautions Personnelles Préparation EN VUE DE LA Charge DE LA Batterie Page Page Emplacement DU Chargeur Batterie Dans LE Véhicule OU Reliée AU MoteurPage Ampèremètre Sèlecteur de RÉGIME/TENSIONDémarrage DU Moteur Protection Contre LA Surcharge10. État Électrique DE LA Batterie Charge DE LA BatterieHeures x facteur de recharge de 1,25 = temps de recharge Charge DE Plusieurs Batteries Directives DE MontageDirectives D’ENTRETIEN 15. DépannageService À LA Clientèle Garantie LimitéeManual DE INSTRUCcIONES Page DE OPERARLO. refiErase LA Seccion Lávese las manos después de su manejo Precauciones PersonalesPreparacion Para Cargar LA Bateria Instrucciones DE Conexion DEL Cable DE Alimentacion DE CA Page Ubicacion DEL Cargador Precauciones Para LA Conexion EN CCPage DEL Vehiculo Esta Conectado a TIERRA, Verifique LA Polaridad Caracteristicas Y Controles DEL Cargador Interruptor I, OAmperimetro Arranque DEL MotorProteccion Para Sobrecarga Nivel Electrico DE LA baterIaCargando LA baterIa Ejemplo Supone que una batería tiene un RC de 120 minutos y Cargar EN LA ParalelaInstalacion DE LA Manija Instrucciones DE MantenimientoLocalizando Problemas Servicio AL Cliente Page
Top Page Image Contents