14.MAINTENANCE INSTRUCTIONS
The charger is designed and built with high quality materials requiring only a minimum amount of care.
14.1Clamps should be cleaned each time the charger is used to prevent corrosion from battery fluid.
14.2Cords should be coiled when the charger is not being used to prevent damage.
14.3Other servicing should be performed by qualified service personnel.
15.TROUBLESHOOTING
15.1No meter reading while charging:
a.Check AC outlet to be sure it is live.
b.Check connections to battery.
c.A circuit breaker may have opened. Refer to section 9.5.
d.Ensure that all operating instructions were followed.
15.2High meter readings while charging:
a.Ensure that battery connections are not reversed.
b.High meter readings can also be caused by a battery with one or more dead cells.
15.3Certain battery conditions can cause meter to indicate incorrectly including cold, sulphated, or damaged batteries.
• 12 •