Grizzly G0659 owner manual Setup Safety Inventory, Unpacking, Main Components Figure Qty

SECTION 3: SETUP

Setup Safety Inventory

This machine presents serious injury hazards to untrained users. Read through this entire manu- al to become familiar with the controls and opera- tions before starting the machine!

Wear safety glasses dur- ing the entire set up pro- cess!

After all parts have been removed from the pack- aging, you should have the following items:

Main Components: (Figure 2)		Qty
A.	Bandsaw Unit (not shown)	1
B.	C-Clamp Vise	1
C.	Round Handle	1
D.	Roller Brackets	2
E.	Roller	1
F.	Counterweight	1
G.	Knob 3⁄8-18 x 2"	1
H.	Lock Washers 5⁄16" (roller)	4
I.	Hex Bolts 5⁄16-18 x 5⁄8" (roller)	4
J.	Vise Support Rod	1
K.	Hex Wrench Kit 1-10mm (not shown)....	1 Ea.

If any nonproprietary parts are missing (e.g. a nut or a washer), we will gladly replace them, or for the sake of expediency, replacements can be obtained at your local hardware store.

The Model G0659 is a heavy machine. DO NOT over-exert yourself while unpacking or moving your machine—get assis- tance.

Unpacking

B

C

D

H

E

F

The Model G0659 was carefully packed when it left our warehouse. If you discover the machine is damaged after you have signed for delivery, please immediately call Customer Service at (570) 546-9663 for advice.

Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult.

When you are completely satisfied with the condi- tion of your shipment, you should inventory the contents.

-10-

J I G

Figure 2. Inventory.

NOTICE

Some components on the inventory list may arrive pre-installed on the machine. Check these locations before assuming that any items from the inventory list are missing.

G0659  9" x 14" Vertical Metal-Cutting Bandsaw