Grizzly G1010 instruction manual Blade Selection, Feed Rate, To adjust the feed rate

Blade Selection

The Model G1010 uses 641⁄2" x 1⁄2" bandsaw blades.

Selecting the right blade for the job depends on a variety of factors, such as the type of mate- rial being cut, hardness of the material, machine capability, and operator technique.

We suggest you do some research for your spe- cific situation so you get the best blade to match your needs.

Grizzly is proud to offer a variety of selections that can be found in the current catalog and in ACCESSORIES on Page 28.

Feed Rate

The feed rate is controlled by the spring and handle shown in Figure 29.

To adjust the feed rate:

—Slower:Twist the handle clockwise to add tension to the spring.

—Faster:Twist the handle counterclockwise to remove tension from the spring.

Spring

Handle

Figure 29. Feed rate adjustment.

G1010 4" x 6" Metal-Cutting Bandsaw -25-