Woodstock W1694 instruction manual Fence Angle Stops, Setting the fence to 90˚

Fence Angle Stops

There are three fence angle stops: 90˚, 45˚ inward, and 45˚ outward. The angle stops allow the fence to be quickly and accurately posi- tioned at various angles.

To adjust the 90˚ angle stop, do these steps:

1.Using a machinist’s square, position the fence 90˚ relative to the table surface (Figure 21).

2.Position the limit plate in the forward slot of the 90˚ slide stop.

3.Loosen the jam nut on the 90˚ stop slide.

4.Using a flat-head screwdriver, adjust the setscrew on the 90˚ stop slide until the peg makes contact with the back of the fence (Figure 22).

5.Retighten the jam nut loosened in step 3.

Figure 21. Setting the fence to 90˚.

Figure 22. Adjusting the 90˚ stop slide.

ADJUSTMENTS

-17-