Woodstock W1694 instruction manual Depth Of Cut, To adjust the depth of cut

Depth Of Cut

The depth of cut is equal to the distance between the infeed table surface and the top of the cutterhead blade at top-dead-center (Figure 28). The depth of cut is adjusted by raising and lowering the infeed table.

To adjust the depth of cut:

•Turn the table height knob (Figure 29) clockwise to raise the infeed table, thereby reducing the depth of cut.

•Turn the knob counter-clockwise to lower the infeed table, thereby increasing the depth of cut.

Never remove more than 1⁄8" of material from the workpiece in a single pass.

Depth Of Cut

Figure 28. Depth of cut.

ADJUSTMENTS

Figure 29. Table height knob.

-20-